EUVIMEDEUVIMED entdecken
Crossref

Understanding the Effect of Three-Dimensional Design in Tandem Blade

Amit Kumar, Akshay Kumar, Hitesh Chhugani, Shubhali More, A. M. Pradeep

Journal of Turbomachinery · 01.03.2024 · 146 (3)

DOI: 10.1115/1.4063924 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 16.11.2023. Verfasst von Amit Kumar und 4 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 28 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to maximize the pressure ratio and efficiency, compressor designers have tried several unconventional design approaches. Tandem blading is one such unconventional design that promises a higher pressure ratio per stage through a higher diffusion factor. The nozzle shape created between the forward and aft blades of a tandem configuration acts as a passive boundary layer control mechanism. The boundary layer growth over the aft rotor is therefore effectively controlled with the help of this gap-nozzle flow. The flow complexity is likely to increase in the case of a tandem rotor due to the twin leakage vortices, twin wake regions, and their interaction with the hub and casing boundary layers. Modern compressor blades are often designed with three-dimensional blade techniques such as sweep, lean, dihedral, end bent, etc., to reduce the various losses and achieve optimum performance. However, to the best of the author’s knowledge, the effect of 3D blade designs on the performance of tandem rotors has not been fully explored so far. A comprehensive numerical investigation is undertaken to understand the effect of 3D designs on the performance of tandem blades. Axial sweep and dihedral failed to improve the performance of the tandem rotor. Significant improvement in the stall margin is observed for the forward chordwise-swept and negative lean tandem rotors and is largely attributed to lower tip incidence. The performance penalty of the forward-swept and negatively leaned cases can be reduced by integrating compound or variable lean and sweep into the design.

Zitieren

APA

Kumar, A., Kumar, A., Chhugani, H., More, S., & Pradeep, A. M. (2024). Understanding the Effect of Three-Dimensional Design in Tandem Blade. Journal of Turbomachinery, 146(3). https://doi.org/10.1115/1.4063924

Vancouver

Kumar A, Kumar A, Chhugani H, More S, Pradeep AM. Understanding the Effect of Three-Dimensional Design in Tandem Blade. Journal of Turbomachinery. 2024;146(3). doi:10.1115/1.4063924

BibTeX
@article{Kumar2024,
  author = {Kumar, Amit and Kumar, Akshay and Chhugani, Hitesh and More, Shubhali and Pradeep, A. M.},
  title = {Understanding the Effect of Three-Dimensional Design in Tandem Blade},
  journal = {Journal of Turbomachinery},
  year = {2024},
  volume = {146},
  number = {3},
  doi = {10.1115/1.4063924}
}
Kostenlos starten →