EUVIMEDEUVIMED entdecken
Crossref

Improving Weldability of Press Hardened Steel Through Combining Stepped Current Pulse and Magnetically Assisted Resistance Spot Welding Process

ZhuoRan Li, DianPing Zhang, RuiMing Chen, SongLin Wang, YuJun Xia, Ming Lou, YongBing Li

Journal of Manufacturing Science and Engineering · 01.02.2024 · 146 (2)

DOI: 10.1115/1.4063904 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing Science and Engineering, online erschienen am 13.11.2023. Verfasst von ZhuoRan Li und 6 weiteren Autor:innen. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 29 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Press-hardened steel (PHS), characterized by its extremely high strength, has wide applications in vehicle body manufacturing as an innovative lightweight material. Nevertheless, the poor weldability of PHS results in poor weld toughness and a high risk of interfacial fracture (IF), posing challenges to the resistance spot welding (RSW) process. Introducing an external magnetic field in the welding process to perform electromagnetic stirring (EMS), the magnetically assisted RSW (MA-RSW) process has been proven an effective method to improve the weld toughness of high-strength steel, but it may increase the risk of expulsion. In response to these challenges, this study introduces a new process called SPMA-RSW to improve the weldability of PHS by combining MA-RSW and the stepped-current pulses (SP) technique, which can enlarge the weld lobe. Nugget appearance, microstructure, microhardness, and mechanical properties were systematically investigated by comparing traditional RSW, MA-RSW, SP-RSW, and SPMA-RSW. The result showed that the SPMA-RSW process would significantly increase the nugget size, inhibit the shrinkage voids, finer the grain size of PHS welds, and harden the nugget region. This increased the lap-shear strength and changed the fracture mode from brittle IF mode to ductile plug fracture (PF) mode at the same heat input. Specifically, the peak load and energy absorption were increased by 32.3% and 84.2%, respectively. Then, an analytical model was developed to reveal the mechanism of the effect of EMS on the fracture mode transition and was verified by experiment. This work can help improve the weld quality and thermal efficiency of the RSW process for PHS.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Li, Z., Zhang, D., Chen, R., Wang, S., Xia, Y., Lou, M., & Li, Y. (2024). Improving Weldability of Press Hardened Steel Through Combining Stepped Current Pulse and Magnetically Assisted Resistance Spot Welding Process. Journal of Manufacturing Science and Engineering, 146(2). https://doi.org/10.1115/1.4063904

Vancouver

Li Z, Zhang D, Chen R, Wang S, Xia Y, Lou M, et al. Improving Weldability of Press Hardened Steel Through Combining Stepped Current Pulse and Magnetically Assisted Resistance Spot Welding Process. Journal of Manufacturing Science and Engineering. 2024;146(2). doi:10.1115/1.4063904

BibTeX
@article{Li2024,
  author = {Li, ZhuoRan and Zhang, DianPing and Chen, RuiMing and Wang, SongLin and Xia, YuJun and Lou, Ming and Li, YongBing},
  title = {Improving Weldability of Press Hardened Steel Through Combining Stepped Current Pulse and Magnetically Assisted Resistance Spot Welding Process},
  journal = {Journal of Manufacturing Science and Engineering},
  year = {2024},
  volume = {146},
  number = {2},
  doi = {10.1115/1.4063904}
}
Kostenlos starten →