EUVIMEDEUVIMED entdecken
Crossref

Temperature-Humidity-Bias Testing and Life Prediction Modeling for Electrochemical Migration in Aerosol-Jet Printed Circuits

Beihan Zhao, Aniket Bharamgonda, Edwin Quinn, George Stackhouse, Jason Fleischer, Michael Osterman, Michael H. Azarian, Daniel R. Hines, Siddhartha Das, Abhijit Dasgupta

Journal of Electronic Packaging · 01.12.2023 · 145 (4)

DOI: 10.1115/1.4063541 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Electronic Packaging, online erschienen am 01.11.2023. Verfasst von Beihan Zhao und 9 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 36 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aerosol-Jet Printing (AJP) technology, applied to the manufacturing of printed hybrid electronics (PHE) devices, has the capability to fabricate highly complex structures with resolution in the tens-of-microns scale, creating new possibilities for the fabrication of electronic devices and assemblies. The widespread use of AJP in fabricating PHE and package-level electronics necessitates a thorough assessment of not only the performance of AJP printed electronics but also their reliability under different kinds of life-cycle operational and environmental stresses. One important hindrance to the reliability and long-term performance of such AJP electronics is electrochemical migration (ECM). ECM is an important failure mechanism in electronics under temperature and humidity conditions because it can lead to conductive dendritic growth, which can cause dielectric breakdown, leakage current, and unexpected short circuits. In this paper, the ECM propensity in conductive traces printed with AJP process, using silver-nanoparticle (AgNP) based inks, was experimentally studied using temperature-humidity-bias (THB) testing of printed test coupons. Conductive dendritic growth with complex morphologies was observed under different levels of temperature, humidity, and electric bias in the THB experiments. Weibull statistics are used to quantify the failure data, along with the corresponding confidence bounds to capture the uncertainty of the Weibull distribution. A nonmonotonic relationship between time-to-failure and electric field strength was noticed. An empirical acceleration model for ECM is proposed, by combining the classical Peck's model with a quadratic polynomial dependence on electric field strength. This model provides good estimate of acceleration factors for use conditions where the temperature, humidity, and electrical field are within the tested range, but should be extrapolated with care beyond the tested range.

Zitieren

APA

Zhao, B., Bharamgonda, A., Quinn, E., Stackhouse, G., Fleischer, J., Osterman, M., Azarian, M. H., Hines, D. R., Das, S., & Dasgupta, A. (2023). Temperature-Humidity-Bias Testing and Life Prediction Modeling for Electrochemical Migration in Aerosol-Jet Printed Circuits. Journal of Electronic Packaging, 145(4). https://doi.org/10.1115/1.4063541

Vancouver

Zhao B, Bharamgonda A, Quinn E, Stackhouse G, Fleischer J, Osterman M, et al. Temperature-Humidity-Bias Testing and Life Prediction Modeling for Electrochemical Migration in Aerosol-Jet Printed Circuits. Journal of Electronic Packaging. 2023;145(4). doi:10.1115/1.4063541

BibTeX
@article{Zhao2023,
  author = {Zhao, Beihan and Bharamgonda, Aniket and Quinn, Edwin and Stackhouse, George and Fleischer, Jason and Osterman, Michael and Azarian, Michael H. and Hines, Daniel R. and Das, Siddhartha and Dasgupta, Abhijit},
  title = {Temperature-Humidity-Bias Testing and Life Prediction Modeling for Electrochemical Migration in Aerosol-Jet Printed Circuits},
  journal = {Journal of Electronic Packaging},
  year = {2023},
  volume = {145},
  number = {4},
  doi = {10.1115/1.4063541}
}
Kostenlos starten →