Large-Eddy Simulations Modeling of High-Lift High-Work Low-Pressure Turbine Blades: Validation and Application
Journal of Turbomachinery · 01.12.2026 · 148 (12)
DOI: 10.1115/1.4063509 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 04.11.2026. Verfasst von Jared Kerestes und 5 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Gefördert von: Air Force Office of Scientific Research.
Abstract (Originalsprache)
Over the years, computational fluids dynamics (CFD) has matured to such a state so as to be indispensable in turbine design. In the past two decades alone, significant advances in turbine design have been made through the use of CFD—in particular, through the use of Reynolds-Averaged Navier–Stokes (RANS) simulations. Currently, turbine design is RANS-driven; however, significant gains in performance and efficiency are becoming more difficult to achieve using RANS. For this reason, the turbomachinery CFD community is moving toward Large-Eddy Simulations (LES). In the design of low-pressure turbine (LPT) blades, LES is particularly beneficial owing to its ability to capture accurately both transition and separation. In this paper, LES is used to characterize a new family of high-lift high-work LPT blades—designated the LXFHW-LS family—designed at the U.S. Air Force Research Laboratory (AFRL). LES simulations are conducted in accordance with the methodology outlined in Part I of this paper. The purpose of this paper is twofold: (1) to use LES to predict the performance of the LXFHW-LS family and compare it to measurements in a low-speed linear cascade and, in doing so, (2) to illustrate how LES may be used in LPT design as it evolves from RANS-driven to LES-driven. For each blade in the family, the loading distribution and loss coefficient are computed for 16 separate Reynolds numbers. Computational results are validated using detailed experimental measurements from a low-speed linear cascade wind tunnel. Experimental measurements include blade loading distributions, total pressure loss, and particle image velocimetry (PIV) measurements. In comparing computational and experimental results, particular emphasis is placed on the evolution of the suction surface (SS) separation bubble (if one exists). A variety of techniques are used to visualize the extent of the separation bubble, including machine learning.
Förderung
- Air Force Office of Scientific Research
Zitieren
APA
Kerestes, J., Marks, C., Clark, J., Wolff, M., Ni, R., & Fletcher, N. (2026). Large-Eddy Simulations Modeling of High-Lift High-Work Low-Pressure Turbine Blades: Validation and Application. Journal of Turbomachinery, 148(12). https://doi.org/10.1115/1.4063509
Vancouver
Kerestes J, Marks C, Clark J, Wolff M, Ni R, Fletcher N. Large-Eddy Simulations Modeling of High-Lift High-Work Low-Pressure Turbine Blades: Validation and Application. Journal of Turbomachinery. 2026;148(12). doi:10.1115/1.4063509
BibTeX
@article{Kerestes2026,
author = {Kerestes, Jared and Marks, Christopher and Clark, John and Wolff, Mitch and Ni, Ron-Ho and Fletcher, Nathan},
title = {Large-Eddy Simulations Modeling of High-Lift High-Work Low-Pressure Turbine Blades: Validation and Application},
journal = {Journal of Turbomachinery},
year = {2026},
volume = {148},
number = {12},
doi = {10.1115/1.4063509}
}
EUVIMED