EUVIMEDEUVIMED entdecken
Crossref

Conjugate Heat Transfer Characteristics of a Film-Cooled Turbine Blade Leading Edge With Staggered-Oblique Impinging Jets

Li Hongye, Du Qiang, Xu Qingzong, Xu Guangyao, Liu Haoyang, Chen Dawei

Journal of Turbomachinery · 01.11.2023 · 145 (11)

DOI: 10.1115/1.4063367 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 04.10.2023. Verfasst von Li Hongye und 5 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 35 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The turbine blade leading edge is subjected to harsh conditions due to high heat loads and unfavorable compact structures. To improve the cooling performance, a novel impingement scheme is proposed to be used in a film-cooled turbine blade leading edge. Different from a normal impingement scheme, the novel scheme consists of two rows of staggered impinging jets at oblique angles of ±35 deg, and is thus named as the staggered-oblique impingement scheme. A conjugated numerical investigation is carried out to illustrate the underlying mechanisms of the cooling performance. Three typical jet Reynolds numbers, 6000, 12,000, and 18,000, are studied using the validated SST k–ω turbulence model. Numerical results show a flow separation within the staggered-oblique impinging jets, which causes the discharge coefficient for the novel impingement scheme lower than that for the normal impingement scheme. Results also reveal a phenomenon difference that two symmetric vortices are induced by each normal impinging jet, while only one vortex appears on the acute angle side along with each staggered-oblique impinging jet. The flow fields of the staggered-oblique impingement scheme create a more uniform heat transfer distribution and a maximum of 23.7% higher area-averaged Nusselt number than the normal impingement scheme. The area-averaged overall cooling effectiveness for the staggered-oblique impingement scheme is higher than the normal impingement scheme by a maximum of 4.8%. The uniformity and the enhancement of the overall cooling effectiveness arise from the wall jet being fully developed and affecting a larger area of the target wall. The adiabatic cooling effectiveness is similar for both impingement schemes. This indicates that the improvement in overall cooling effectiveness for the staggered-oblique impingement scheme mainly arises from internal heat transfer.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Hongye, L., Qiang, D., Qingzong, X., Guangyao, X., Haoyang, L., & Dawei, C. (2023). Conjugate Heat Transfer Characteristics of a Film-Cooled Turbine Blade Leading Edge With Staggered-Oblique Impinging Jets. Journal of Turbomachinery, 145(11). https://doi.org/10.1115/1.4063367

Vancouver

Hongye L, Qiang D, Qingzong X, Guangyao X, Haoyang L, Dawei C. Conjugate Heat Transfer Characteristics of a Film-Cooled Turbine Blade Leading Edge With Staggered-Oblique Impinging Jets. Journal of Turbomachinery. 2023;145(11). doi:10.1115/1.4063367

BibTeX
@article{Hongye2023,
  author = {Hongye, Li and Qiang, Du and Qingzong, Xu and Guangyao, Xu and Haoyang, Liu and Dawei, Chen},
  title = {Conjugate Heat Transfer Characteristics of a Film-Cooled Turbine Blade Leading Edge With Staggered-Oblique Impinging Jets},
  journal = {Journal of Turbomachinery},
  year = {2023},
  volume = {145},
  number = {11},
  doi = {10.1115/1.4063367}
}
Kostenlos starten →