High-Fidelity Computational Assessment of Aero-Thermal Performance and the Reynolds’ Analogy for Additively Manufactured Anisotropic Surface Roughness
Journal of Turbomachinery · 01.11.2023 · 145 (11)
DOI: 10.1115/1.4063298 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 14.09.2023. Verfasst von Thomas O. Jelly und 6 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 47 Literaturangaben. Gefördert von: Australian Research Council.
Abstract (Originalsprache)
Direct numerical simulations of incompressible turbulent forced convection over irregular, anisotropic surface roughness in a pressure-driven plane channel flow have been performed. Heat transfer was simulated by solving the passive scalar transport equation with Prandtl number Pr = 0.7. The roughness topographies under investigation here are based on an X-ray computed tomography scan of an additively manufactured internal cooling passage, which had an irregular, multiscale and mildly non-Gaussian height distribution. Three different roughness topographies and three different friction Reynolds numbers (Reτ = 395, 590, 720) were considered, along with reference smooth-wall simulations at matched Reτ. By systematically varying the roughness topography and flow conditions, a direct computational assessment of aero-thermal performance (pressure losses and heat transfer) and the Reynolds analogy factor, i.e., 2Ch/Cf, where Ch is the heat-transfer coefficient (Stanton number) and Cf is the skin-friction coefficient, was conducted. The results highlight the profound impact that the roughness orientation (relative to the flow direction) has upon the aero-thermal performance of additively manufactured internal passages, with transverse-aligned roughness augmenting heat transfer by as much as 33%, relative to its streamwise-aligned counterpart. An interrogation of velocity and temperature statistics in the near-wall region was also performed, which underlined the growing dissimilarity between heat transfer and drag as fully rough conditions are approached.
Förderung
- Australian Research Council
Zitieren
APA
Jelly, T. O., Rowin, W. A., Hutchins, N., Chung, D., Tanimoto, K., Oda, T., & Sandberg, R. D. (2023). High-Fidelity Computational Assessment of Aero-Thermal Performance and the Reynolds’ Analogy for Additively Manufactured Anisotropic Surface Roughness. Journal of Turbomachinery, 145(11). https://doi.org/10.1115/1.4063298
Vancouver
Jelly TO, Rowin WA, Hutchins N, Chung D, Tanimoto K, Oda T, et al. High-Fidelity Computational Assessment of Aero-Thermal Performance and the Reynolds’ Analogy for Additively Manufactured Anisotropic Surface Roughness. Journal of Turbomachinery. 2023;145(11). doi:10.1115/1.4063298
BibTeX
@article{Jelly2023,
author = {Jelly, Thomas O. and Rowin, Wagih Abu and Hutchins, Nicholas and Chung, Daniel and Tanimoto, Koichi and Oda, Takuo and Sandberg, Richard D.},
title = {High-Fidelity Computational Assessment of Aero-Thermal Performance and the Reynolds’ Analogy for Additively Manufactured Anisotropic Surface Roughness},
journal = {Journal of Turbomachinery},
year = {2023},
volume = {145},
number = {11},
doi = {10.1115/1.4063298}
}
EUVIMED