Characterizing Shrouded Stator Cavity Flow on the Performance of a Single-Stage Axial Transonic Compressor
Journal of Turbomachinery · 01.11.2023 · 145 (11)
DOI: 10.1115/1.4063296 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 14.09.2023. Verfasst von Runzhu Shao und 4 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 24 Literaturangaben. Gefördert von: Directorate-General for Research and Innovation, Great Britain China Centre, Imperial College London.
Abstract (Originalsprache)
Shrouded stator cavity flow increases the stator total pressure loss, reduces the compressor isentropic efficiency, and thus limits the compressor pressure rise capability. This paper proposes a simplified cavity flow model that consists of flow injection at the stator inlet and flow suction at the stator outlet. Based on this model, a full-factorial parametric study on the leakage flow ratio and the leakage swirl angle is performed at different rotational speeds and incidences. In the first place, the effectiveness of the numerical method is validated against the experimental data based on the full-scale cavity geometry; then, the numerical simulations on the simplified cavity geometry are validated against that of the full-scale one. Results show that the leakage flow ratio plays a dominant role in determining the compressor performance penalty. The isentropic efficiency drops almost linearly with the leakage flow ratio due to deteriorated near-hub separations, and the slope becomes steeper at higher operating speeds and incidences. The leakage swirl angle only has a pronounced effect under a high leakage flow ratio. The efficiency penalty reduces with increasing swirl angle due to an alleviated tangential flow mixing and suppressed near-hub separations. The swirl angle effect is more pronounced at lower incidence conditions. These findings advance the fundamental understanding of shrouded stator cavity flow effects and provide useful guidance for cavity seal designs.
Förderung
- Directorate-General for Research and Innovation
- Great Britain China Centre
- Imperial College London
- Ministry of Education of the People's Republic of China
- National Natural Science Foundation of China
- Shanghai Municipal Education Commission
Zitieren
APA
Shao, R., He, X., Zhu, M., Klausmann, F., & Teng, J. (2023). Characterizing Shrouded Stator Cavity Flow on the Performance of a Single-Stage Axial Transonic Compressor. Journal of Turbomachinery, 145(11). https://doi.org/10.1115/1.4063296
Vancouver
Shao R, He X, Zhu M, Klausmann F, Teng J. Characterizing Shrouded Stator Cavity Flow on the Performance of a Single-Stage Axial Transonic Compressor. Journal of Turbomachinery. 2023;145(11). doi:10.1115/1.4063296
BibTeX
@article{Shao2023,
author = {Shao, Runzhu and He, Xiao and Zhu, Mingmin and Klausmann, Fabian and Teng, Jinfang},
title = {Characterizing Shrouded Stator Cavity Flow on the Performance of a Single-Stage Axial Transonic Compressor},
journal = {Journal of Turbomachinery},
year = {2023},
volume = {145},
number = {11},
doi = {10.1115/1.4063296}
}
EUVIMED