EUVIMEDEUVIMED entdecken
Crossref

Effect of Upstream Leakage Flow on Film Cooling Characteristic of a Turbine Convex Endwall

Jie Zhang, Cunliang Liu, Xiying Niu, Weijiang Xu, Li Zhang, Xuyang Liu

Journal of Turbomachinery · 01.11.2023 · 145 (11)

DOI: 10.1115/1.4063188 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 29.08.2023. Verfasst von Jie Zhang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 27 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper investigates the effect of upstream leakage coolant flow on the film cooling performance of the convex endwall. The experiment is conducted in an annular passage with four vanes, and the endwall film cooling effectiveness distribution is measured by the pressure-sensitive paint technique. The near-wall flow field distribution predicted by computational fluid dynamics is employed to gain a deeper understanding of the influence of the passage secondary flow on the film cooling characteristic of the endwall. Furthermore, the effect of mass flow ratios (MFR = 0.75%, 1.0%, 1.25%, and 1.5%), leakage slot inclination angles (α = 30 deg, 45 deg, and 60 deg), density ratios (DR = 1.0, 1.5, and 2.0), as well as Reynolds number (Re = 2.0 × 105, 3.0 × 105, and 4.0 × 105) on the endwall film cooling is also investigated. Results indicate that the mass flow ratio has a great influence on the endwall film cooling effectiveness distribution, and a larger uncooled region can be observed when MFR is less than 1.25% due to the cooling air more easily being entrained by the secondary flow near the endwall. Reducing the inclination angle of the leakage slot enhances the axial velocity component of the coolant flow, thereby weakening the secondary flow near the endwall and improving the film cooling effectiveness distribution of the endwall. As the density ratio increases, the jet momentum of the leakage flow is reduced, particularly for higher MFR cases, which results in a significant reduction in the film cooling performance of the endwall. Besides, thinning the incoming boundary layer of the passage reduces the strength and size of the secondary flow in the passage and improves the endwall adiabatic effectiveness distribution when the Reynolds number is increased.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Zhang, J., Liu, C., Niu, X., Xu, W., Zhang, L., & Liu, X. (2023). Effect of Upstream Leakage Flow on Film Cooling Characteristic of a Turbine Convex Endwall. Journal of Turbomachinery, 145(11). https://doi.org/10.1115/1.4063188

Vancouver

Zhang J, Liu C, Niu X, Xu W, Zhang L, Liu X. Effect of Upstream Leakage Flow on Film Cooling Characteristic of a Turbine Convex Endwall. Journal of Turbomachinery. 2023;145(11). doi:10.1115/1.4063188

BibTeX
@article{Zhang2023,
  author = {Zhang, Jie and Liu, Cunliang and Niu, Xiying and Xu, Weijiang and Zhang, Li and Liu, Xuyang},
  title = {Effect of Upstream Leakage Flow on Film Cooling Characteristic of a Turbine Convex Endwall},
  journal = {Journal of Turbomachinery},
  year = {2023},
  volume = {145},
  number = {11},
  doi = {10.1115/1.4063188}
}
Kostenlos starten →