EUVIMEDEUVIMED entdecken
Crossref

Method for Evaluating Cortical Bone Young's Modulus: Numerical Twin Reconstruction, Finite Element Calculation, and Microstructure Analysis

T Kurtz, T Woitrain, Y Godio-Raboutet, F L B Ribeiro, P-J Arnoux, J-L Tailhan

Journal of Biomechanical Engineering · 2023

DOI: 10.1115/1.4063100 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Biomechanical Engineering, 2023. Verfasst von T Kurtz und 5 weiteren Autor:innen. Beteiligte Einrichtung: Aix Marseille Univ, Univ Gustave Eiffel, LBA, Marseille 13015, France. Hauptthemen laut MEDLINE: Bone and Bones, Cortical Bone. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 50 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The determination of bone mechanical properties remains crucial, especially to feed up numerical models. An original methodology of inverse analysis has been developed to determine the longitudinal elastic modulus of femoral cortical bone. The method is based on a numerical twin of a specific three-point bending test. It has been designed to be reproducible on each test result. In addition, the biofidelity of the geometric acquisition method has been quantified. As the assessment is performed at the scale of a bone shaft segment, the Young's modulus values obtained (between 9518.29 MPa and 14181.15 MPa) are considered average values for the whole tissue, highlighting some intersubject variability. The material microstructure has also been studied through histological analysis, and bone-to-bone comparisons highlighted discrepancies in quadrants microstructures. Furthermore, significant intrasubject variability exists since differences between the bone's medial-lateral and anterior–posterior quadrants have been observed. Thus, the study of microstructures can largely explain the differences between the elastic modulus values obtained. However, a more in-depth study of bone mineral density would also be necessary and would provide some additional information. This study is currently being setup, alongside an investigation of the local variations of the elastic modulus.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Bone and BonesCortical BoneElastic ModulusFinite Element AnalysisBiomechanical PhenomenaBone Density

Stichwörter der Autor:innen

Young's moduluscortical bonefinite elementinverse analysismechanical testmicrostructurenumerical twin

Autor:innen und Institutionen

  • Aix Marseille Univ, Univ Gustave Eiffel, LBA, Marseille 13015, France.
  • Department of Civil Engineering, COPPE, Federal University of Rio de Janeiro, Centro de Tecnologia - Ilha do Fundao, Rio de Janeiro 21941, Brazil.
  • Univ Gustave Eiffel, MAST-EMGCU, Marne la Vallée 77454, France.

Zitieren

APA

Kurtz, T., Woitrain, T., Godio-Raboutet, Y., Ribeiro, F. L. B., Arnoux, P. J., & Tailhan, J. L. (2023). Method for Evaluating Cortical Bone Young's Modulus: Numerical Twin Reconstruction, Finite Element Calculation, and Microstructure Analysis. Journal of Biomechanical Engineering. https://doi.org/10.1115/1.4063100

Vancouver

Kurtz T, Woitrain T, Godio-Raboutet Y, Ribeiro FLB, Arnoux PJ, Tailhan JL. Method for Evaluating Cortical Bone Young's Modulus: Numerical Twin Reconstruction, Finite Element Calculation, and Microstructure Analysis. Journal of Biomechanical Engineering. 2023. doi:10.1115/1.4063100

BibTeX
@article{Kurtz2023,
  author = {Kurtz, T and Woitrain, T and Godio-Raboutet, Y and Ribeiro, F L B and Arnoux, P-J and Tailhan, J-L},
  title = {Method for Evaluating Cortical Bone Young's Modulus: Numerical Twin Reconstruction, Finite Element Calculation, and Microstructure Analysis},
  journal = {Journal of Biomechanical Engineering},
  year = {2023},
  doi = {10.1115/1.4063100}
}
Kostenlos starten →