EUVIMEDEUVIMED entdecken
Crossref

Large Deflection Effects on the Energy Release Rate and Mode Partitioning of the Single Cantilever Beam Sandwich Debond Configuration

Daniel O. Okegbu, George A. Kardomateas

Journal of Applied Mechanics · 01.01.2024 · 91 (1)

DOI: 10.1115/1.4062936 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Mechanics, online erschienen am 25.08.2023. Verfasst von Daniel O. Okegbu und 1 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 24 Literaturangaben. Gefördert von: Office of Naval Research.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper investigates the effects of large deflections on the energy release rate and mode partitioning of face/core debonds for the single cantilever beam sandwich composite testing configuration, which is loaded with an applied shear force and/or a bending moment. Studies in this topic have been done by employing geometrically linear theories (either Euler–Bernoulli or Timoshenko beam theory). This assumes that the deflection at the tip of the loaded debonded part is small, which is not always the case. To address this effect, we employ the elastica theory, which is a nonlinear theory, for the debonded part. An elastic foundation analysis and the linear Euler Bernoulli theory are employed for the “joined” section where a series of springs exists between the face and the substrate (core and bottom face). A closed form expression for the energy release rate is derived by the use of J-integral. Another closed-form expression for the energy release rate is derived from the energy released by a differential spring as the debond propagates. Furthermore, a mode partitioning angle is defined based on the displacement field solution. Results for a range of core materials are in very good agreement with the corresponding ones from a finite element analysis. The results show that large deflection effects reduce the energy release rate but do not have a noteworthy effect on the mode partitioning. A small deflection assumption can significantly overestimate the energy release rate for relatively large applied loads and/or relatively long debonds.

Förderung

  • Office of Naval Research

Zitieren

APA

Okegbu, D. O., & Kardomateas, G. A. (2024). Large Deflection Effects on the Energy Release Rate and Mode Partitioning of the Single Cantilever Beam Sandwich Debond Configuration. Journal of Applied Mechanics, 91(1). https://doi.org/10.1115/1.4062936

Vancouver

Okegbu DO, Kardomateas GA. Large Deflection Effects on the Energy Release Rate and Mode Partitioning of the Single Cantilever Beam Sandwich Debond Configuration. Journal of Applied Mechanics. 2024;91(1). doi:10.1115/1.4062936

BibTeX
@article{Okegbu2024,
  author = {Okegbu, Daniel O. and Kardomateas, George A.},
  title = {Large Deflection Effects on the Energy Release Rate and Mode Partitioning of the Single Cantilever Beam Sandwich Debond Configuration},
  journal = {Journal of Applied Mechanics},
  year = {2024},
  volume = {91},
  number = {1},
  doi = {10.1115/1.4062936}
}
Kostenlos starten →