Optimization Method of Design Parameters of Hypoid Gears With Low Sliding Ratio
Journal of Mechanical Design · 01.10.2023 · 145 (10)
DOI: 10.1115/1.4062880 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Mechanical Design, online erschienen am 19.07.2023. Verfasst von Yu Zhang und 2 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 27 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Hunan Province.
Abstract (Originalsprache)
To reduce the wear, an optimization method of hypoid gears with the objective of minimizing the pinion sliding ratio is proposed. First, the sliding ratio model of the hypoid gear is established on the basis of the spatial gear meshing theory. Furthermore, the influence of design parameters on the sliding ratio and the relative sliding velocity is discussed, and the analysis results show that the parameters, especially the spiral angle and the pressure angle, have the most significant influence on the sliding ratio of the pinion. Additionally, the optimization model of hypoid gears is established, and the optimization objective is to minimize the sum of the absolute sliding ratios of 34 meshing points on the pinion tooth surfaces. Through comparison before and after optimization, it is found that the maximum drops of the sliding ratios for the pinion drive and coast side are 68.6% and 29.58%, respectively. Finally, the results of the running temperature tests demonstrate that the temperature of the optimized gear pair is significantly reduced and that the proposed method is effective.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Hunan Province
Zitieren
APA
Zhang, Y., Wang, Z., & Yan, H. (2023). Optimization Method of Design Parameters of Hypoid Gears With Low Sliding Ratio. Journal of Mechanical Design, 145(10). https://doi.org/10.1115/1.4062880
Vancouver
Zhang Y, Wang Z, Yan H. Optimization Method of Design Parameters of Hypoid Gears With Low Sliding Ratio. Journal of Mechanical Design. 2023;145(10). doi:10.1115/1.4062880
BibTeX
@article{Zhang2023,
author = {Zhang, Yu and Wang, Zhiyong and Yan, Hongzhi},
title = {Optimization Method of Design Parameters of Hypoid Gears With Low Sliding Ratio},
journal = {Journal of Mechanical Design},
year = {2023},
volume = {145},
number = {10},
doi = {10.1115/1.4062880}
}
EUVIMED