Theoretical Puncture Mechanics of Soft Compressible Solids
Journal of Applied Mechanics · 01.11.2023 · 90 (11)
DOI: 10.1115/1.4062844 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Applied Mechanics, online erschienen am 02.08.2023. Verfasst von Stefano Fregonese und 3 weiteren Autor:innen. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 29 Literaturangaben. Gefördert von: Defence Research and Development Canada, Human Frontier Science Program, Natural Sciences and Engineering Research Council of Canada.
Abstract (Originalsprache)
Accurate prediction of the force required to puncture a soft material is critical in many fields like medical technology, food processing, and manufacturing. However, such a prediction strongly depends on our understanding of the complex nonlinear behavior of the material subject to deep indentation and complex failure mechanisms. Only recently, we developed theories capable of correlating puncture force with material properties and needle geometry. However, such models are based on simplifications that seldom limit their applicability to real cases. One common assumption is the incompressibility of the cut material, albeit no material is truly incompressible. In this article, we propose a simple model that accounts for linearly elastic compressibility, and its interplay with toughness, stiffness, and elastic strain stiffening. Confirming previous theories and experiments, materials having high toughness and low modulus exhibit the highest dimensionless puncture resistance at a given needle radius. Surprisingly, in these conditions, we observe that incompressible materials exhibit the lowest puncture resistance, where volumetric compressibility can create an additional (strain) energy barrier to puncture. Our model provides a valuable tool to assess the puncture resistance of soft compressible materials and suggests new design strategies for sharp needles and puncture-resistant materials.
Förderung
- Defence Research and Development Canada
- Human Frontier Science Program
- Natural Sciences and Engineering Research Council of Canada
Zitieren
APA
Fregonese, S., Tong, Z., Wang, S., & Bacca, M. (2023). Theoretical Puncture Mechanics of Soft Compressible Solids. Journal of Applied Mechanics, 90(11). https://doi.org/10.1115/1.4062844
Vancouver
Fregonese S, Tong Z, Wang S, Bacca M. Theoretical Puncture Mechanics of Soft Compressible Solids. Journal of Applied Mechanics. 2023;90(11). doi:10.1115/1.4062844
BibTeX
@article{Fregonese2023,
author = {Fregonese, Stefano and Tong, Zhiyuan and Wang, Sibo and Bacca, Mattia},
title = {Theoretical Puncture Mechanics of Soft Compressible Solids},
journal = {Journal of Applied Mechanics},
year = {2023},
volume = {90},
number = {11},
doi = {10.1115/1.4062844}
}
EUVIMED