G-Puzzle: Infilling 3D Models With Reinforced G-Lattices
Journal of Mechanical Design · 01.10.2023 · 145 (10)
DOI: 10.1115/1.4062832 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Mechanical Design, online erschienen am 19.07.2023. Verfasst von Arash Armanfar und 2 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 37 Literaturangaben.
Abstract (Originalsprache)
G-Lattices (proposed by Armanfar and Gunpinar) are a group of novel periodic and strut-based lattice structures for additive manufacturing. It has been demonstrated that these structures have superior mechanical properties under compression compared to conventional lattice structures. This paper introduces an extension of G-Lattices (i.e., reinforced G-Lattices) that also have better mechanical performance under inclined (compression) loading conditions. For different inclined loads, separate reinforced G-Lattices are first optimized, and a G-Lattice library is formed. For a part under loading, displacement vectors in each unit cell (cubic domains within the inner region of the part) are then extracted. Based on these vectors, (pre-optimized) reinforced G-Lattices are selected from the G-Lattice library and utilized (as infills) in the unit cells. This process is called G-Puzzling. As a proof of concept, parts under three different inclined loading conditions are infilled using reinforced G-Lattices and investigated based on stiffness-over-volume ratios. According to these experiments, the resulting parts, on average, exhibit more than 30% better mechanical performance compared to FBCCZ (a conventional lattice structure).
Zitieren
APA
Armanfar, A., Ustundag, E., & Gunpinar, E. (2023). G-Puzzle: Infilling 3D Models With Reinforced G-Lattices. Journal of Mechanical Design, 145(10). https://doi.org/10.1115/1.4062832
Vancouver
Armanfar A, Ustundag E, Gunpinar E. G-Puzzle: Infilling 3D Models With Reinforced G-Lattices. Journal of Mechanical Design. 2023;145(10). doi:10.1115/1.4062832
BibTeX
@article{Armanfar2023,
author = {Armanfar, Arash and Ustundag, Ersan and Gunpinar, Erkan},
title = {G-Puzzle: Infilling 3D Models With Reinforced G-Lattices},
journal = {Journal of Mechanical Design},
year = {2023},
volume = {145},
number = {10},
doi = {10.1115/1.4062832}
}
EUVIMED