Effect of Internal Mechanical Environment of Porous Scaffolds on Mechano-driven Bone Ingrowth: A Numerical Study
Journal of Biomechanical Engineering · 01.09.2023 · 145 (9)
DOI: 10.1115/1.4062489 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Biomechanical Engineering, online erschienen am 31.05.2023. Verfasst von Mengke Huo und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096, China; Department…. Hauptthemen laut MEDLINE: Osseointegration, Spinal Fusion. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 63 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Research Grants Council, University Grants Committee.
Abstract (Originalsprache)
Porous cages with lower global stiffness induce more bone ingrowth and enhance bone-implant anchorage. However, it's dangerous for spinal fusion cages, which usually act as stabilizers, to sacrifice global stiffness for bone ingrowth. Intentional design on internal mechanical environment might be a promising approach to promote osseointegration without undermining global stiffness excessively. In this study, three porous cages with different architectures were designed to provide distinct internal mechanical environments for bone remodeling during spinal fusion process. A design space optimization-topology optimization based algorithm was utilized to numerically reproduce the mechano-driven bone ingrowth process under three daily load cases, and the fusion outcomes were analyzed in terms of bone morphological parameters and bone-cage stability. Simulation results show that the uniform cage with higher compliance induces deeper bone ingrowth than the optimized graded cage. Whereas, the optimized graded cage with the lowest compliance exhibits the lowest stress at the bone-cage interface and better mechanical stability. Combining the advantages of both, the strain-enhanced cage with locally weakened struts offers extra mechanical stimulus while keeping relatively low compliance, leading to more bone formation and the best mechanical stability. Thus, the internal mechanical environment can be well-designed via tailoring architectures to promote bone ingrowth and achieve a long-term bone-scaffold stability.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096, China; Department of Mechanical Engineering, City University of Hong Kong, Hong Kong 99…
- State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096, China.
- Shenzhen Mindray Bio-Medical Electronics Co., Ltd., Shenzhen 518057, China; Wuhan Mindray Scientific Co., Ltd., Wuhan 430070, China.
- Department of Mechanical Engineering, City University of Hong Kong, Hong Kong 999077, China; CityU-Shenzhen Futian Research Institute, Shenzhen 518045, China; Shenyang National Laboratory for Materials Science, Centre f…
Förderung
- National Natural Science Foundation of China
- Research Grants Council, University Grants Committee
Zitieren
APA
Huo, M., He, S., Liu, Q., Feng, Y., Liu, M., Zhou, P., & Lu, J. (2023). Effect of Internal Mechanical Environment of Porous Scaffolds on Mechano-driven Bone Ingrowth: A Numerical Study. Journal of Biomechanical Engineering, 145(9). https://doi.org/10.1115/1.4062489
Vancouver
Huo M, He S, Liu Q, Feng Y, Liu M, Zhou P, et al. Effect of Internal Mechanical Environment of Porous Scaffolds on Mechano-driven Bone Ingrowth: A Numerical Study. Journal of Biomechanical Engineering. 2023;145(9). doi:10.1115/1.4062489
BibTeX
@article{Huo2023,
author = {Huo, Mengke and He, Siyuan and Liu, Qing and Feng, Yuxiao and Liu, Mengxing and Zhou, Ping and Lu, Jian},
title = {Effect of Internal Mechanical Environment of Porous Scaffolds on Mechano-driven Bone Ingrowth: A Numerical Study},
journal = {Journal of Biomechanical Engineering},
year = {2023},
volume = {145},
number = {9},
doi = {10.1115/1.4062489}
}
EUVIMED