EUVIMEDEUVIMED entdecken
Crossref

Roughness-Resolved Large-Eddy Simulation of Additive Manufacturing-Like Channel Flows

Serge Meynet, Alexis Barge, Vincent Moureau, Guillaume Balarac, Ghislain Lartigue, Abdellah Hadjadj

Journal of Turbomachinery · 01.08.2023 · 145 (8)

DOI: 10.1115/1.4062245 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 22.05.2023. Verfasst von Serge Meynet und 5 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 27 Literaturangaben. Gefördert von: European Commission.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the last decade, progresses in additive manufacturing (AM) have paved the way for optimized heat exchangers whose disruptive design will heavily rely on predictive numerical simulations. However, due to typical roughness induced by AM, current wall models used in steady and unsteady 3D Navier–Stokes simulations do not take into account such characteristics. For the development and assessment of novel wall models for AM, a high-fidelity roughness-resolved large-eddy simulation (RRLES) database is built. This article describes the numerical setup and the methodology used for conducting RRLES, from surface generation to postprocessing. In addition, three different cases representing two printing directions plus a streamwise and spanwise isotropic case are investigated. While the roughness distributions are the same in the three cases, the effective slope (ES) is very different, and the impact of this parameter on turbulence and heat transfer is analyzed at different Reynolds numbers.

Förderung

  • European Commission

Zitieren

APA

Meynet, S., Barge, A., Moureau, V., Balarac, G., Lartigue, G., & Hadjadj, A. (2023). Roughness-Resolved Large-Eddy Simulation of Additive Manufacturing-Like Channel Flows. Journal of Turbomachinery, 145(8). https://doi.org/10.1115/1.4062245

Vancouver

Meynet S, Barge A, Moureau V, Balarac G, Lartigue G, Hadjadj A. Roughness-Resolved Large-Eddy Simulation of Additive Manufacturing-Like Channel Flows. Journal of Turbomachinery. 2023;145(8). doi:10.1115/1.4062245

BibTeX
@article{Meynet2023,
  author = {Meynet, Serge and Barge, Alexis and Moureau, Vincent and Balarac, Guillaume and Lartigue, Ghislain and Hadjadj, Abdellah},
  title = {Roughness-Resolved Large-Eddy Simulation of Additive Manufacturing-Like Channel Flows},
  journal = {Journal of Turbomachinery},
  year = {2023},
  volume = {145},
  number = {8},
  doi = {10.1115/1.4062245}
}
Kostenlos starten →