EUVIMEDEUVIMED entdecken
Crossref

Experimental and Computational Investigation of an Advanced Casing Treatment in a Single-Stage High-Speed Compressor

Nicholas H. Maher, Mark H. Ross, Scott C. Morris, Stephan Priebe, Giridhar Jothiprasad, David Allan, Gregory McNulty, Michael Macrorie, Ramakrishna Mallina

Journal of Turbomachinery · 01.07.2023 · 145 (7)

DOI: 10.1115/1.4056699 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 09.02.2023. Verfasst von Nicholas H. Maher und 8 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 11 Literaturangaben. Gefördert von: Office of Naval Research.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An advanced casing treatment (CT) design was tested in a single-stage, high-speed axial compressor. The geometry of the casing included bent-axial slots applied near the rotor leading edge. Compressor performance and stall margin (SM) measurements were acquired for both casing treatment and for the smooth wall case at four different corrected speeds. The measurements also included rotor-exit radial traverses of unsteady total pressure. The results indicated an increase in rotor pressure ratio at all operating conditions with the application of the casing treatment. The stall margin also increased at all rotor speeds. Efficiency increases were observed with the casing treatment at design conditions and some off-design conditions. Numerical simulations of the IGV, rotor, and stator were conducted with and without the casing treatment. These results served to validate the efficacy of the part-wheel unsteady Reynolds-averaged Navier–Stokes (URANS) simulations to predict the effects of the casing treatment. The simulations also allowed a detailed study of the flow physics related to the interactions between the rotor and casing.

Förderung

  • Office of Naval Research

Zitieren

APA

Maher, N. H., Ross, M. H., Morris, S. C., Priebe, S., Jothiprasad, G., Allan, D., McNulty, G., Macrorie, M., & Mallina, R. (2023). Experimental and Computational Investigation of an Advanced Casing Treatment in a Single-Stage High-Speed Compressor. Journal of Turbomachinery, 145(7). https://doi.org/10.1115/1.4056699

Vancouver

Maher NH, Ross MH, Morris SC, Priebe S, Jothiprasad G, Allan D, et al. Experimental and Computational Investigation of an Advanced Casing Treatment in a Single-Stage High-Speed Compressor. Journal of Turbomachinery. 2023;145(7). doi:10.1115/1.4056699

BibTeX
@article{Maher2023,
  author = {Maher, Nicholas H. and Ross, Mark H. and Morris, Scott C. and Priebe, Stephan and Jothiprasad, Giridhar and Allan, David and McNulty, Gregory and Macrorie, Michael and Mallina, Ramakrishna},
  title = {Experimental and Computational Investigation of an Advanced Casing Treatment in a Single-Stage High-Speed Compressor},
  journal = {Journal of Turbomachinery},
  year = {2023},
  volume = {145},
  number = {7},
  doi = {10.1115/1.4056699}
}
Kostenlos starten →