EUVIMEDEUVIMED entdecken
Crossref

A Modeling Method for a 6-SPS Perpendicular Parallel Micro-Manipulation Robot Considering the Motion in Multiple Nonfunctional Directions and Nonlinear Hysteresis

Chenkun Qi, Jianfeng Lin, Xin Liu, Feng Gao, Yi Yue, Yan Hu, Baochen Wei

Journal of Mechanical Design · 01.05.2023 · 145 (5)

DOI: 10.1115/1.4056574 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Mechanical Design, online erschienen am 10.01.2023. Verfasst von Chenkun Qi und 6 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 49 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Shanghai.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Precision motion systems that call for an ultrahigh resolution are widely used in ultrahigh-precision engineering applications. In this article, a 6-SPS perpendicular compliant parallel micro-manipulation robot is presented. It is difficult to establish the mapping relationship between the applied voltage and end-effector pose due to the existence of compliant joints and piezoelectric actuators. A modeling method for a 6-SPS perpendicular compliant parallel micro-manipulation robot considering the motion in nonfunctional directions and hysteresis effect is proposed to reflect the characteristic from input voltage to output pose. The motion of the spherical compliant joint is regarded as a spatial six degrees-of-freedom mechanism. This method considers the motion errors in multiple nonfunctional directions of the compliant joints. The internal force and torque are also taken into account based on the spatial force and moment balance condition. The slow, fast dynamic modes, and hysteresis nonlinearity behavior are described using a series and parallel hybrid model structures. The kinematic model and compliance model without considering the motion in nonfunctional directions are conducted for comparison. Simulation results show that the presented modeling method has higher modeling accuracy. Finally, experiments on a 6DOF compliant parallel micro-manipulation robot reveal the fine modeling performance of the developed method for the precision motion systems in the presence of intrinsic hysteresis effect and motion error of compliant joints.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Shanghai

Zitieren

APA

Qi, C., Lin, J., Liu, X., Gao, F., Yue, Y., Hu, Y., & Wei, B. (2023). A Modeling Method for a 6-SPS Perpendicular Parallel Micro-Manipulation Robot Considering the Motion in Multiple Nonfunctional Directions and Nonlinear Hysteresis. Journal of Mechanical Design, 145(5). https://doi.org/10.1115/1.4056574

Vancouver

Qi C, Lin J, Liu X, Gao F, Yue Y, Hu Y, et al. A Modeling Method for a 6-SPS Perpendicular Parallel Micro-Manipulation Robot Considering the Motion in Multiple Nonfunctional Directions and Nonlinear Hysteresis. Journal of Mechanical Design. 2023;145(5). doi:10.1115/1.4056574

BibTeX
@article{Qi2023,
  author = {Qi, Chenkun and Lin, Jianfeng and Liu, Xin and Gao, Feng and Yue, Yi and Hu, Yan and Wei, Baochen},
  title = {A Modeling Method for a 6-SPS Perpendicular Parallel Micro-Manipulation Robot Considering the Motion in Multiple Nonfunctional Directions and Nonlinear Hysteresis},
  journal = {Journal of Mechanical Design},
  year = {2023},
  volume = {145},
  number = {5},
  doi = {10.1115/1.4056574}
}
Kostenlos starten →