Cooling and Flow Characteristics of Multi-Channel Wall Jet Structure With Film Holes at Blade Leading Edge
Journal of Turbomachinery · 01.06.2023 · 145 (6)
DOI: 10.1115/1.4056513 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 09.01.2023. Verfasst von Huihui Wang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 32 Literaturangaben. Gefördert von: Ministry of Industry and Information Technology of the People's Republic of China.
Abstract (Originalsprache)
Efficient cooling is imperative for gas turbine blades that suffer from hot gas erosion. Cooling and flow characteristics of multi-channel wall jet structure combined with film holes for blade leading edge are numerically investigated through the Reynolds-averaged Navier–Stokes method in this paper. Several geometrical schemes with different rows and diameters of film holes were conducted, and the influences of the cooling air mass flow ratio of the first coolant supply cavity were also considered, which presented the detailed flow and cooling characteristics of wall jet and film composite cooling on conjugate heat transfer. The results implied that film extraction improves the overall cooling effectiveness compared with pure wall jet cooling. And the mainstream intrusion happens in some film holes at the bottom of blades, especially on the pressure side. The film-hole diameter can raise the mass flow ratio and enhance external thermal protection produced by cooling air, and it also affects the uniformity of film flow and the temperature gradient of some regions for turbine blades. Furthermore, the cooling performance and pressure loss are significantly influenced by the coolant mass flowrate of the first cooling air supply cavity. This study will offer a consultation for the design of film-hole structures for multi-channel wall jet cooling.
Förderung
- Ministry of Industry and Information Technology of the People's Republic of China
Zitieren
APA
Wang, H., Deng, Q., He, W., & Feng, Z. (2023). Cooling and Flow Characteristics of Multi-Channel Wall Jet Structure With Film Holes at Blade Leading Edge. Journal of Turbomachinery, 145(6). https://doi.org/10.1115/1.4056513
Vancouver
Wang H, Deng Q, He W, Feng Z. Cooling and Flow Characteristics of Multi-Channel Wall Jet Structure With Film Holes at Blade Leading Edge. Journal of Turbomachinery. 2023;145(6). doi:10.1115/1.4056513
BibTeX
@article{Wang2023,
author = {Wang, Huihui and Deng, Qinghua and He, Wei and Feng, Zhenping},
title = {Cooling and Flow Characteristics of Multi-Channel Wall Jet Structure With Film Holes at Blade Leading Edge},
journal = {Journal of Turbomachinery},
year = {2023},
volume = {145},
number = {6},
doi = {10.1115/1.4056513}
}
EUVIMED