EUVIMEDEUVIMED entdecken
Crossref

Influence of Strain History on Dynamic Strain Localization and Stress State During High-Rate Tensile Loading of Titanium Alloys: Experiments, Modeling, and Analytical Methods

Govind Gour, Daniel Thomson, Karthik Ram Ramakrishnan, David Townsend, Nik Petrinic, Antonio Pellegrino

Journal of Applied Mechanics · 01.02.2023 · 90 (2)

DOI: 10.1115/1.4056136 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Mechanics, online erschienen am 18.11.2022. Verfasst von Govind Gour und 5 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 58 Literaturangaben. Gefördert von: Engineering and Physical Sciences Research Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The determination of the mechanical response of engineering materials subjected to high loading rates plays an important role in determining their performance and application. The high strain-rate tensile response of metals is usually investigated by means of the split-Hopkinson tension bar (SHTB) apparatus. The interpretation of the obtained results is, however, subjected to analogous stress and strain uniformity challenges present during quasi-static tensile experiments. Beyond the onset of necking, strains cease to be uniform along the gauge length and localize around the necking zone. Consequently, the nominal strain rate underestimates the effective strain rate experienced by the material. The analysis of the effective strain rate and stress state beyond the onset of necking has received considerable attention in the literature. Several research efforts have focused on the optimization of the geometry of specimens to be employed for the characterization of the dynamic tensile response using the SHTB. The present work investigates, systematically, the effects of strain history and adiabatic heating on the stress state during dynamic loading. A series of monotonic and various strain history experiments were conducted and analyzed. The diameter evolution, effective strain rate, and temperature histories were measured for all conducted experiments. Numerical simulations were carried out to examine the stress state during strain localization and to accurately reproduce engineering and local thermos-mechanical variables. The effectiveness of existing postnecking corrections for high-rate experiments is assessed. A modified postnecking correlation taking into account the effects of adiabatically induced thermal softening is proposed.

Förderung

  • Engineering and Physical Sciences Research Council

Zitieren

APA

Gour, G., Thomson, D., Ramakrishnan, K. R., Townsend, D., Petrinic, N., & Pellegrino, A. (2023). Influence of Strain History on Dynamic Strain Localization and Stress State During High-Rate Tensile Loading of Titanium Alloys: Experiments, Modeling, and Analytical Methods. Journal of Applied Mechanics, 90(2). https://doi.org/10.1115/1.4056136

Vancouver

Gour G, Thomson D, Ramakrishnan KR, Townsend D, Petrinic N, Pellegrino A. Influence of Strain History on Dynamic Strain Localization and Stress State During High-Rate Tensile Loading of Titanium Alloys: Experiments, Modeling, and Analytical Methods. Journal of Applied Mechanics. 2023;90(2). doi:10.1115/1.4056136

BibTeX
@article{Gour2023,
  author = {Gour, Govind and Thomson, Daniel and Ramakrishnan, Karthik Ram and Townsend, David and Petrinic, Nik and Pellegrino, Antonio},
  title = {Influence of Strain History on Dynamic Strain Localization and Stress State During High-Rate Tensile Loading of Titanium Alloys: Experiments, Modeling, and Analytical Methods},
  journal = {Journal of Applied Mechanics},
  year = {2023},
  volume = {90},
  number = {2},
  doi = {10.1115/1.4056136}
}
Kostenlos starten →