Numerical Investigations on the Rotating Stall in an Axial Compressor and Its Control by Flow Injection at Casing
Journal of Turbomachinery · 01.05.2023 · 145 (5)
DOI: 10.1115/1.4056090 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 25.11.2022. Verfasst von Julien Marty und 2 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 27 Literaturangaben. Gefördert von: Cleansky.
Abstract (Originalsprache)
The operating range of a compressor is limited by surge or rotating stall line, among others. Numerical simulations must accurately predict these phenomena. This study is based on the experimental compressor CME2, which is a low-subsonic axial compressor. This compressor is tip-critical as the rotor tip is responsible for the rotating stall. This paper shows that the rotating stall onset flow rate is well captured by computational fluid dynamics, compared to experiments. After ten revolutions, all cells are merged and only one cell remains, as in experiments. Active flow control improves compressor performance and extends the stable operating range. In the present configuration, flow injection is performed at the casing. In the simulation, the insertion of the actuators is carried out through hybrid meshes: structured mesh for blade passages and unstructured mesh for each actuator. For the some stalled operating points of baseline configuration, there is no rotating cells in the controlled configuration. Thus, the rotating stall is delayed at lower flow rate, as expected by the use of active flow control and is in agreement with the experiments.
Förderung
- Cleansky
Zitieren
APA
Marty, J., Castillon, L., & Joseph, P. (2023). Numerical Investigations on the Rotating Stall in an Axial Compressor and Its Control by Flow Injection at Casing. Journal of Turbomachinery, 145(5). https://doi.org/10.1115/1.4056090
Vancouver
Marty J, Castillon L, Joseph P. Numerical Investigations on the Rotating Stall in an Axial Compressor and Its Control by Flow Injection at Casing. Journal of Turbomachinery. 2023;145(5). doi:10.1115/1.4056090
BibTeX
@article{Marty2023,
author = {Marty, Julien and Castillon, Lionel and Joseph, Pierric},
title = {Numerical Investigations on the Rotating Stall in an Axial Compressor and Its Control by Flow Injection at Casing},
journal = {Journal of Turbomachinery},
year = {2023},
volume = {145},
number = {5},
doi = {10.1115/1.4056090}
}
EUVIMED