Predictive Modeling of Local Film-Cooling Flow on a Turbine Rotor Blade
Journal of Turbomachinery · 01.04.2023 · 145 (4)
DOI: 10.1115/1.4055972 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 07.11.2022. Verfasst von Eric T. DeShong und 2 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 24 Literaturangaben.
Abstract (Originalsprache)
In the turbine section of a modern gas turbine engine, components exposed to the main gas path flow rely on cooling air to maintain hardware durability targets. Therefore, monitoring turbine cooling flow is essential to the diagnostic and prognostic efficacy of a condition-based operation and maintenance (CBOM) approach. This study supports CBOM goals by leveraging supervised machine learning to estimate relative changes to local film-cooling flowrate using surface temperature measured on the pressure side of a rotating turbine blade operating at engine-relevant aerothermal conditions. Throughout the lifetime of a film-cooled turbine component, characteristics of the film-cooling flow—such as film trajectory and cooling effectiveness—vary as degradation-driven geometry distortions occur, which ultimately affects the relationship between the model input and the model output—film-cooling flowrate predictions. The present study addresses this complication by testing a data-driven model on multiple turbine blades of the same nominal design, but with each blade exhibiting different localized film-cooling flow characteristics. By testing the model in this manner, strategies for mitigating the detrimental effects of film-cooling flow characteristic variations on model performance were investigated, and the corresponding flowrate prediction accuracy was quantified.
Zitieren
APA
DeShong, E. T., Berdanier, R. A., & Thole, K. A. (2023). Predictive Modeling of Local Film-Cooling Flow on a Turbine Rotor Blade. Journal of Turbomachinery, 145(4). https://doi.org/10.1115/1.4055972
Vancouver
DeShong ET, Berdanier RA, Thole KA. Predictive Modeling of Local Film-Cooling Flow on a Turbine Rotor Blade. Journal of Turbomachinery. 2023;145(4). doi:10.1115/1.4055972
BibTeX
@article{DeShong2023,
author = {DeShong, Eric T. and Berdanier, Reid A. and Thole, Karen A.},
title = {Predictive Modeling of Local Film-Cooling Flow on a Turbine Rotor Blade},
journal = {Journal of Turbomachinery},
year = {2023},
volume = {145},
number = {4},
doi = {10.1115/1.4055972}
}
EUVIMED