Shape Optimization of Flat Clinching Tools by Combining Finite Element Simulation and Response Surface Method
Journal of Manufacturing Science and Engineering · 01.02.2023 · 145 (2)
DOI: 10.1115/1.4055894 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing Science and Engineering, online erschienen am 07.11.2022. Verfasst von Huiyang Zhang und 1 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 29 Literaturangaben. Gefördert von: National Natural Science Foundation of China, State Key Laboratory of High Performance Complex Manufacturing, Central South University.
Abstract (Originalsprache)
Flat clinched joints are increasingly being investigated due to the flat bottom surface. In the current study, the shape of the flat clinching tools was optimized to improve the joint strength. Experimental tests of flat clinching were carried out using different forming loads to provide validation data for finite element simulations. Cross-tension tests were conducted under quasi-static conditions to evaluate the mechanical characteristics of the joint samples. Multiple finite element models based on the response surface method were developed to obtain the functional relationship between the four tool parameters and neck area, as well as the functional relationship between the four parameters and undercut area, respectively. The geometric effects of the flat clinching tools on the neck and undercut areas were analyzed. A genetic algorithm was used to obtain a solution set that maximized both the neck and undercut areas. The cross-tension strength of the joint produced according to the best-tested solution was 1526 N, which was 13.7% higher than that of the pre-optimized joint. The optimization method in this study could effectively improve the joint strength of the flat clinching process.
Förderung
- National Natural Science Foundation of China
- State Key Laboratory of High Performance Complex Manufacturing, Central South University
Zitieren
APA
Zhang, H., & Chen, C. (2023). Shape Optimization of Flat Clinching Tools by Combining Finite Element Simulation and Response Surface Method. Journal of Manufacturing Science and Engineering, 145(2). https://doi.org/10.1115/1.4055894
Vancouver
Zhang H, Chen C. Shape Optimization of Flat Clinching Tools by Combining Finite Element Simulation and Response Surface Method. Journal of Manufacturing Science and Engineering. 2023;145(2). doi:10.1115/1.4055894
BibTeX
@article{Zhang2023,
author = {Zhang, Huiyang and Chen, Chao},
title = {Shape Optimization of Flat Clinching Tools by Combining Finite Element Simulation and Response Surface Method},
journal = {Journal of Manufacturing Science and Engineering},
year = {2023},
volume = {145},
number = {2},
doi = {10.1115/1.4055894}
}
EUVIMED