EUVIMEDEUVIMED entdecken
Crossref

Numerical Study of Large Footprint (24 × 24 mm2) Silicon-Based Embedded Microchannel Three-Dimensional Manifold Coolers

Tiwei Wei, Sougata Hazra, Yujui Lin, Man Prakash Gupta, Michael Degner, Mehdi Asheghi, Kenneth E. Goodson

Journal of Electronic Packaging · 01.06.2023 · 145 (2)

DOI: 10.1115/1.4055468 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Electronic Packaging, online erschienen am 28.09.2022. Verfasst von Tiwei Wei und 6 weiteren Autor:innen. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 19 Literaturangaben. Gefördert von: National Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Silicon-based embedded microchannel with three-dimensional (3D) manifold (MF) μ-cooler offers lower pressure drop and increased heat removal capability (>1 kW/cm2) for microprocessors and power electronics cooling using single-phase water. In this paper, we present a thermal–fluidic numerical analysis of silicon-embedded microchannel cooling. We develop a full-scale computational fluid dynamics (CFD) model of a large footprint (24 × 24 mm2) device having embedded microchannels and a 3D manifold. It is found that the pressure/velocity distributions at three different critical regions inside the inlet manifold have a significant impact on the temperature distribution. A previous study reported a shift of the chip temperature hot-spot at high flow rates; this study delves deep into the flow and pressure variations within the MF and cold plate (CP) that leads to this shift. This study also investigates the degree of flow maldistribution, first between the manifold channels caused by the plenum and then between the cold plate channels caused by individual MF channels. Finally, this study concludes with a comparison between two different 3D manifold inlet channel heights. The comparison reveals that the manifold with 1.5 mm thickness can reduce the pressure drop by a factor of 4 while maintaining the same thermal resistance of 0.04 K cm2/W, thus indicating an increase in the coefficient of performance (COP) by a factor of 4, compared with a manifold thickness of 0.7 mm.

Förderung

  • National Science Foundation

Zitieren

APA

Wei, T., Hazra, S., Lin, Y., Gupta, M. P., Degner, M., Asheghi, M., & Goodson, K. E. (2023). Numerical Study of Large Footprint (24 × 24 mm2) Silicon-Based Embedded Microchannel Three-Dimensional Manifold Coolers. Journal of Electronic Packaging, 145(2). https://doi.org/10.1115/1.4055468

Vancouver

Wei T, Hazra S, Lin Y, Gupta MP, Degner M, Asheghi M, et al. Numerical Study of Large Footprint (24 × 24 mm2) Silicon-Based Embedded Microchannel Three-Dimensional Manifold Coolers. Journal of Electronic Packaging. 2023;145(2). doi:10.1115/1.4055468

BibTeX
@article{Wei2023,
  author = {Wei, Tiwei and Hazra, Sougata and Lin, Yujui and Gupta, Man Prakash and Degner, Michael and Asheghi, Mehdi and Goodson, Kenneth E.},
  title = {Numerical Study of Large Footprint (24 × 24 mm2) Silicon-Based Embedded Microchannel Three-Dimensional Manifold Coolers},
  journal = {Journal of Electronic Packaging},
  year = {2023},
  volume = {145},
  number = {2},
  doi = {10.1115/1.4055468}
}
Kostenlos starten →