Use of Multiple Tracer Gases to Quantify Vane Trailing Edge Flow Into Turbine Rim Seals
Journal of Turbomachinery · 01.01.2023 · 145 (1)
DOI: 10.1115/1.4055445 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 07.10.2022. Verfasst von Iván Monge-Concepción und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 31 Literaturangaben. Gefördert von: U.S. Department of Energy.
Abstract (Originalsprache)
Overlapping features are commonly used as rim seals between stationary and rotating components in a turbine stage. These rim seals are used to prevent main gas path ingestion to the wheelspace cavity, which reduces the lifespan of critical engine components such as the turbine disk. In addition to the overlapping features, purge flow, diverted from the compressor, is injected into the rim cavity to act as an airflow sealing mechanism. Previous research identified that in addition to the purge flow in the rim cavity, cooling flow from the vane trailing edge (VTE) is ingested into the rim seal cavity carrying the potential to cool components in the wheelspace. These previous findings, however, were not able to distinctly separate purge from VTE cooling flows, which is the contribution of this paper based on uniquely using two different tracer gases. A one-stage test turbine operating at engine-relevant conditions and consisting of real engine hardware was used to validate and quantify the ingestion of the VTE flow by independently seeding the purge and VTE flows with two different tracer gases. Experimental results show the presence of VTE flow in the rim seal throughout all purge flowrates evaluated. Circumferential variation of VTE flow was also studied both experimentally and computationally using a computational fluid dynamics model. Results showed that ingested VTE flow can reduce the detrimental effect of hot gas ingestion particularly at higher purge flowrates.
Förderung
- U.S. Department of Energy
Zitieren
APA
Monge-Concepción, I., Barringer, M. D., Berdanier, R. A., Thole, K. A., & Robak, C. (2023). Use of Multiple Tracer Gases to Quantify Vane Trailing Edge Flow Into Turbine Rim Seals. Journal of Turbomachinery, 145(1). https://doi.org/10.1115/1.4055445
Vancouver
Monge-Concepción I, Barringer MD, Berdanier RA, Thole KA, Robak C. Use of Multiple Tracer Gases to Quantify Vane Trailing Edge Flow Into Turbine Rim Seals. Journal of Turbomachinery. 2023;145(1). doi:10.1115/1.4055445
BibTeX
@article{MongeConcepcin2023,
author = {Monge-Concepción, Iván and Barringer, Michael D. and Berdanier, Reid A. and Thole, Karen A. and Robak, Christopher},
title = {Use of Multiple Tracer Gases to Quantify Vane Trailing Edge Flow Into Turbine Rim Seals},
journal = {Journal of Turbomachinery},
year = {2023},
volume = {145},
number = {1},
doi = {10.1115/1.4055445}
}
EUVIMED