EUVIMEDEUVIMED entdecken
Crossref

Friction and Wear Behavior of a Physical Vapor Deposition Coating Studied Using a Micro-Scratch Technique

Kaouther Khlifi, Hafedh Dhiflaoui, Chokri Ben Aissa, Najoua Barhoumi, Ahmed Ben Cheikh Larbi

Journal of Engineering Materials and Technology · 01.04.2022 · 144 (2)

DOI: 10.1115/1.4052239 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Engineering Materials and Technology, online erschienen am 08.09.2021. Verfasst von Kaouther Khlifi und 4 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 36 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

CrSiN coating was deposited by physical vapor deposition (PVD) magnetron sputtering on XC100 steel substrate. Microstructural and morphological properties were studied using scanning electron microscopy (SEM)/energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), and atomic force microscopy (AFM). Nanoindentation and scratching experiments were conducted to study the mechanical and adhesion behavior. Multi-pass scratch tests were conducted under different sliding conditions. Results showed that CrSiN coating has a dense and compact nanocomposite microstructure consisting of CrN nanocrystallites and SiN amorphous matrix. The CrSiN thin film exhibit hardness and Young's modulus of 30.52 ± 1.85 GPa and 338.32 ± 13.5 GPa, respectively. The H/E, H3/E2, and 1/HE2 ratios were also calculated (H/E ≈ 0.09, H3/E2 ≈ 0.024, and 1/HE2 ≈ 2.86 × 10−07) and used to predict and assess the elastic/plastic and wear resistance. Critical loads LC1, LC2, and LC3 obtained with scratch test, were, respectively, 11.5 ± 0.12, 16.6 ± 0.23, and 20 ± 0.35 N. Multi-pass scratch were analyzed and the friction coefficient (COF), the damage mechanism, and wear volume were determined. The use of an energetic approach allowed to determine the energetic wear coefficient. CrSiN coating revealed a low friction coefficient (around 0.1) and a low energetic wear coefficient (6.3 × 10−7 mm3/N.m). In addition, it was found that multi-pass scratch method has the potential to extract relevant information about wear behavior.

Zitieren

APA

Khlifi, K., Dhiflaoui, H., Aissa, C. B., Barhoumi, N., & Larbi, A. B. C. (2022). Friction and Wear Behavior of a Physical Vapor Deposition Coating Studied Using a Micro-Scratch Technique. Journal of Engineering Materials and Technology, 144(2). https://doi.org/10.1115/1.4052239

Vancouver

Khlifi K, Dhiflaoui H, Aissa CB, Barhoumi N, Larbi ABC. Friction and Wear Behavior of a Physical Vapor Deposition Coating Studied Using a Micro-Scratch Technique. Journal of Engineering Materials and Technology. 2022;144(2). doi:10.1115/1.4052239

BibTeX
@article{Khlifi2022,
  author = {Khlifi, Kaouther and Dhiflaoui, Hafedh and Aissa, Chokri Ben and Barhoumi, Najoua and Larbi, Ahmed Ben Cheikh},
  title = {Friction and Wear Behavior of a Physical Vapor Deposition Coating Studied Using a Micro-Scratch Technique},
  journal = {Journal of Engineering Materials and Technology},
  year = {2022},
  volume = {144},
  number = {2},
  doi = {10.1115/1.4052239}
}
Kostenlos starten →