EUVIMEDEUVIMED entdecken
Crossref

Modeling of Reversed Austenite Formation and Its Effect on Performance of Stainless Steel Components

Sadie Louise Green, Hemantha Kumar Yeddu

Journal of Engineering Materials and Technology · 01.07.2021 · 143 (3)

DOI: 10.1115/1.4050134 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Engineering Materials and Technology, online erschienen am 04.03.2021. Verfasst von Sadie Louise Green und 1 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 44 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The kinetics of reversed austenite formation in 301 stainless steel and its effect on the deformation of an automobile front bumper beam are studied by using modeling approaches at different length scales. The diffusion-controlled reversed austenite formation is studied by using the Johnson–Mehl–Avrami–Kolmogorov (JMAK) model, based on the experimental data. The model can be used to predict the volume fraction of reversed austenite in a temperature range of 650–750 °C. A three-dimensional elastoplastic phase-field model is used to study the diffusionless shear-type reversed austenite formation in 301 steel at 760 °C. The phase-field simulations show that reversion initiates at martensite lath boundaries and proceeds inwards of laths due to the high driving force at such high temperature. The effect of reversed austenite (RA) and martensite on the deformation of a bumper beam subjected to front and side impacts is studied by using finite element (FE) analysis. The FE simulations show that the presence of reversed austenite and martensite increased the critical speed at which the beam yielded and failed. RA fraction also affects the performance of the bumper beam.

Zitieren

APA

Green, S. L., & Yeddu, H. K. (2021). Modeling of Reversed Austenite Formation and Its Effect on Performance of Stainless Steel Components. Journal of Engineering Materials and Technology, 143(3). https://doi.org/10.1115/1.4050134

Vancouver

Green SL, Yeddu HK. Modeling of Reversed Austenite Formation and Its Effect on Performance of Stainless Steel Components. Journal of Engineering Materials and Technology. 2021;143(3). doi:10.1115/1.4050134

BibTeX
@article{Green2021,
  author = {Green, Sadie Louise and Yeddu, Hemantha Kumar},
  title = {Modeling of Reversed Austenite Formation and Its Effect on Performance of Stainless Steel Components},
  journal = {Journal of Engineering Materials and Technology},
  year = {2021},
  volume = {143},
  number = {3},
  doi = {10.1115/1.4050134}
}
Kostenlos starten →