A Review of Damping Models for Structures With Mechanical Joints1
Applied Mechanics Reviews · 01.07.2020 · 72 (4)
DOI: 10.1115/1.4047707 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Mechanics Reviews, online erschienen am 31.07.2020. Verfasst von Allen T. Mathis und 5 weiteren Autor:innen. Die Arbeit wurde bisher 122-mal zitiert (Crossref) und nennt 214 Literaturangaben.
Abstract (Originalsprache)
In a standard design practice, it is often necessary to assemble engineered structures from individually manufactured parts. Ideally, the assembled system should perform as if the connections between the components were perfect, that is, as if the system were a single monolithic piece. However, the fasteners used in those connections, such as mechanical lap joints, are imperfect and highly nonlinear. In particular, these jointed connections dissipate energy, often through friction over highly localized microscale regions near connection points, and are known to exhibit history dependent, or hysteretic behavior. As a result, while mechanical joints are one of the most common elements in structural dynamics problems, their presence implies that assembled structural systems are difficult to model and analyze. Through rigorous experimental, analytical, and numerical work over the past century, researchers from several different disciplines have developed numerous damping models that give rise to the dynamical behavior attributed to joints. This work seeks to review, compare, and contrast several linear and nonlinear damping models that are known to be relevant to modeling assembled structural systems. These models are presented and categorized to place them in the proper historical and mathematical context as well as presenting numerous examples of their applications. General properties of hysteretic friction damping models are also studied and compared analytically. Connections are drawn between the different models so as to not only identify differences between models, but also highlight commonalities not normally seen to be in association.
Zitieren
APA
Mathis, A. T., Balaji, N. N., Kuether, R. J., Brink, A. R., Brake, M. R. W., & Quinn, D. D. (2020). A Review of Damping Models for Structures With Mechanical Joints1. Applied Mechanics Reviews, 72(4). https://doi.org/10.1115/1.4047707
Vancouver
Mathis AT, Balaji NN, Kuether RJ, Brink AR, Brake MRW, Quinn DD. A Review of Damping Models for Structures With Mechanical Joints1. Applied Mechanics Reviews. 2020;72(4). doi:10.1115/1.4047707
BibTeX
@article{Mathis2020,
author = {Mathis, Allen T. and Balaji, Nidish N. and Kuether, Robert J. and Brink, Adam R. and Brake, Matthew R. W. and Quinn, D. Dane},
title = {A Review of Damping Models for Structures With Mechanical Joints1},
journal = {Applied Mechanics Reviews},
year = {2020},
volume = {72},
number = {4},
doi = {10.1115/1.4047707}
}
EUVIMED