EUVIMEDEUVIMED entdecken
Crossref

Vertical Deployment of Multilayered Metallic Microstructures With High Area-to-Mass Ratios by Thermal Actuation

Zhongjing Ren, Jianping Yuan, Xiaoyu Su, Hao Sun, Richard Galos, Yong Shi, Sundeep Mangla, Ming Lu, Fernando Camino

Journal of Micro and Nano-Manufacturing · 01.09.2019 · 7 (3)

DOI: 10.1115/1.4043987 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Micro and Nano-Manufacturing, online erschienen am 25.07.2019. Verfasst von Zhongjing Ren und 8 weiteren Autor:innen. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 30 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lightweight microstructures with high area-to-mass ratios, or low surface densities, show great potential applications in microrobots, soft electronics, medical devices, and solar sailing. However, the bending stiffness of such microstructures is usually too low to work effectively. In order to obtain active microstructures with enhanced bending stiffness, a new design for thermally actuated multilayered metallic microstructures with high area-to-mass ratios is presented in this article. The microstructures made of aluminum and NiTi alloy are fabricated to demonstrate the feasibility of vertical deployment of such microstructures under thermal actuation. The concept design and working principle of designed multilayered metallic microstructures are based on symmetrical deposition of metals Al\NiTi\NiTi\Al, followed by practical microfabrication processes, such as photolithography, physical vapor deposition (PVD), and dry etch. The area-to-mass ratios of such microstructures could be up to 400 m2/kg. Then, experiments for electrical characterization are set up for thermal actuation or Joule heating. Besides that, the equivalent resistances of such microstructures with regard to temperatures are calibrated, allowing for the determination of in situ temperatures of deformed microstructures when being heated in the vacuum chamber of scanning electron microscope (SEM). Finally, vertical deployment of such thin microstructures is detected and measured, which validates the feasibility of stiffness enhancement through the symmetrical design and thermal actuation.

Zitieren

APA

Ren, Z., Yuan, J., Su, X., Sun, H., Galos, R., Shi, Y., Mangla, S., Lu, M., & Camino, F. (2019). Vertical Deployment of Multilayered Metallic Microstructures With High Area-to-Mass Ratios by Thermal Actuation. Journal of Micro and Nano-Manufacturing, 7(3). https://doi.org/10.1115/1.4043987

Vancouver

Ren Z, Yuan J, Su X, Sun H, Galos R, Shi Y, et al. Vertical Deployment of Multilayered Metallic Microstructures With High Area-to-Mass Ratios by Thermal Actuation. Journal of Micro and Nano-Manufacturing. 2019;7(3). doi:10.1115/1.4043987

BibTeX
@article{Ren2019,
  author = {Ren, Zhongjing and Yuan, Jianping and Su, Xiaoyu and Sun, Hao and Galos, Richard and Shi, Yong and Mangla, Sundeep and Lu, Ming and Camino, Fernando},
  title = {Vertical Deployment of Multilayered Metallic Microstructures With High Area-to-Mass Ratios by Thermal Actuation},
  journal = {Journal of Micro and Nano-Manufacturing},
  year = {2019},
  volume = {7},
  number = {3},
  doi = {10.1115/1.4043987}
}
Kostenlos starten →