EUVIMEDEUVIMED entdecken
Crossref

Thermo-Elastic Model of Epicenter Displacement by Laser Pulse Irradiated on Metallic Surfaces

Thanh Chung Truong, Ayalsew Dagnew Abetew, Jung-Ryul Lee, Jeong-Beom Ihn

Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems · 2018

DOI: 10.1115/1.4038030 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems, 2018. Verfasst von Thanh Chung Truong und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 33 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In recent years, there is a much interest in developing of nondestructive testing (NDT) systems using the pulse-echo laser ultrasonics. The key idea is to combine a low-power and short-pulsewidth laser excitation with a continuous sensing laser; and use a scanning mechanism, such as five degrees-of-freedom (5DOF)-axis robot, laser mirror scanner, or motorized linear translation or rotation scanner stage, to scan the combined beam on the structure. In order to optimize the parameters of the excitation laser, a realistic theoretical model of the epicenter displacement in thermo-elastic regime is needed. This paper revisits and revises the study of Spicer and Hurley (1996, “Epicentral and Near Epicenter Surface Displacements on Pulsed Laser Irradiated Metallic Surfaces,” Appl. Phys. Lett., 68(25), pp. 3561–3563) on thermo-elastic model of epicenter displacement with two new contributions: first, we revised Spicer’s model to take into account the optical penetration effect, which was neglected in Spicer’s model; and second, the revised model was used to investigate the effect of laser rise time and beam size to the epicenter displacement. We showed that a pulse laser with short rise time generates an equivalent surface displacement with a pulse laser with long rise time, except a “spike” at the beginning of the epicenter waveform; also when the laser beam size increases, the epicenter displacement decreases. These two conclusions were then validated by experiments.

Zitieren

APA

Truong, T. C., Abetew, A. D., Lee, J., & Ihn, J. (2018). Thermo-Elastic Model of Epicenter Displacement by Laser Pulse Irradiated on Metallic Surfaces. Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems. https://doi.org/10.1115/1.4038030

Vancouver

Truong TC, Abetew AD, Lee J, Ihn J. Thermo-Elastic Model of Epicenter Displacement by Laser Pulse Irradiated on Metallic Surfaces. Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems. 2018. doi:10.1115/1.4038030

BibTeX
@article{Truong2018,
  author = {Truong, Thanh Chung and Abetew, Ayalsew Dagnew and Lee, Jung-Ryul and Ihn, Jeong-Beom},
  title = {Thermo-Elastic Model of Epicenter Displacement by Laser Pulse Irradiated on Metallic Surfaces},
  journal = {Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems},
  year = {2018},
  doi = {10.1115/1.4038030}
}
Kostenlos starten →