EUVIMEDEUVIMED entdecken
Crossref

Effect of Proximity of Features on the Damage Threshold During Submicron Additive Manufacturing Via Two-Photon Polymerization

Sourabh K. Saha, Chuck Divin, Jefferson A. Cuadra, Robert M. Panas

Journal of Micro and Nano-Manufacturing · 01.09.2017 · 5 (3)

DOI: 10.1115/1.4036445 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Micro and Nano-Manufacturing, online erschienen am 12.05.2017. Verfasst von Sourabh K. Saha und 3 weiteren Autor:innen. Die Arbeit wurde bisher 62-mal zitiert (Crossref) und nennt 19 Literaturangaben. Gefördert von: Lawrence Livermore National Laboratory.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Two-photon polymerization (TPP) is a laser writing process that enables fabrication of millimeter scale three-dimensional (3D) structures with submicron features. In TPP, writing is achieved via nonlinear two-photon absorption that occurs at high laser intensities. Thus, it is essential to carefully select the incident power to prevent laser damage during polymerization. Currently, the feasible range of laser power is identified by writing small test patterns at varying power levels. Herein, we demonstrate that the results of these tests cannot be generalized, because the damage threshold power depends on the proximity of features and reduces by as much as 47% for overlapping features. We have identified that this reduction occurs primarily due to an increase in the single-photon absorptivity of the resin after curing. We have captured the damage from proximity effects via X-ray 3D computed tomography (CT) images of a nonhomogenous part that has varying feature density. Part damage manifests as internal spherical voids that arise due to boiling of the resist. We have empirically quantified this proximity effect by identifying the damage threshold power at different writing speeds and feature overlap spacings. In addition, we present a first-order analytical model that captures the scaling of this proximity effect. Based on this model and the experiments, we have identified that the proximity effect is more significant at high writing speeds; therefore, it adversely affects the scalability of manufacturing. The scaling laws and the empirical data generated here can be used to select the appropriate TPP writing parameters.

Förderung

  • Lawrence Livermore National Laboratory

Zitieren

APA

Saha, S. K., Divin, C., Cuadra, J. A., & Panas, R. M. (2017). Effect of Proximity of Features on the Damage Threshold During Submicron Additive Manufacturing Via Two-Photon Polymerization. Journal of Micro and Nano-Manufacturing, 5(3). https://doi.org/10.1115/1.4036445

Vancouver

Saha SK, Divin C, Cuadra JA, Panas RM. Effect of Proximity of Features on the Damage Threshold During Submicron Additive Manufacturing Via Two-Photon Polymerization. Journal of Micro and Nano-Manufacturing. 2017;5(3). doi:10.1115/1.4036445

BibTeX
@article{Saha2017,
  author = {Saha, Sourabh K. and Divin, Chuck and Cuadra, Jefferson A. and Panas, Robert M.},
  title = {Effect of Proximity of Features on the Damage Threshold During Submicron Additive Manufacturing Via Two-Photon Polymerization},
  journal = {Journal of Micro and Nano-Manufacturing},
  year = {2017},
  volume = {5},
  number = {3},
  doi = {10.1115/1.4036445}
}
Kostenlos starten →