EUVIMEDEUVIMED entdecken
Crossref

Study on Neutronics and Thermalhydraulics Characteristics of 1200-MWel Pressure-Channel Supercritical Water-Cooled Reactor

Marija Miletic, Wargha Peiman, Amjad Farah, Jeffrey Samuel, Alexey Dragunov, Igor Pioro

Journal of Nuclear Engineering and Radiation Science · 2015

DOI: 10.1115/1.4026387 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Nuclear Engineering and Radiation Science, 2015. Verfasst von Marija Miletic und 5 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nuclear power becomes more and more important in many countries worldwide as a basis for current and future electrical energy generation. The largest group of operating nuclear power plants (NPPs) equipped with water-cooled reactors (96% of all NPPs) has gross thermal efficiencies ranging from 30–36%. Such relatively low values of thermal efficiencies are due to lower pressures/temperatures at the inlet to a turbine (4.5–7.8 MPa/257–293°C). However, modern combined-cycle power plants (Brayton gas-turbine cycle and subcritical-pressure steam Rankine cycle, fueled by natural gas) and supercritical-pressure coal-fired power plants have reached gross thermal efficiencies of 62% and 55%, respectively. Therefore, next generation or Generation IV NPPs with water-cooled reactors should have thermal efficiencies as close as possible to those of modern thermal power plants. A significant increase in thermal efficiencies of water-cooled NPPs can be possible only due to increasing turbine inlet parameters above the critical point of water, i.e., supercritical water-cooled reactors (SCWRs) have to be designed. This path of increasing thermal efficiency is considered as a conventional way that coal-fired power plants followed more than 50 years ago. Therefore, an objective of the current paper is a study on neutronics and thermalhydraulics characteristics of a generic 1200-MWel pressure-channel (PCh) SCWR. Standard neutronics codes DRAGON and DONJON have been coupled with a new thermalhydraulics code developed based on the latest empirical heat-transfer correlation, which allowed for more accurate estimation of basic characteristics of a PCh SCWR. In addition, the computational fluid dynamics (CFD) Fluent code has been used for better understanding of the specifics of heat transfer in supercritical water. Future studies will be dedicated to materials and fuels testing in an in-pile supercritical water loop and developing passive safety systems.

Zitieren

APA

Miletic, M., Peiman, W., Farah, A., Samuel, J., Dragunov, A., & Pioro, I. (2015). Study on Neutronics and Thermalhydraulics Characteristics of 1200-MWel Pressure-Channel Supercritical Water-Cooled Reactor. Journal of Nuclear Engineering and Radiation Science. https://doi.org/10.1115/1.4026387

Vancouver

Miletic M, Peiman W, Farah A, Samuel J, Dragunov A, Pioro I. Study on Neutronics and Thermalhydraulics Characteristics of 1200-MWel Pressure-Channel Supercritical Water-Cooled Reactor. Journal of Nuclear Engineering and Radiation Science. 2015. doi:10.1115/1.4026387

BibTeX
@article{Miletic2015,
  author = {Miletic, Marija and Peiman, Wargha and Farah, Amjad and Samuel, Jeffrey and Dragunov, Alexey and Pioro, Igor},
  title = {Study on Neutronics and Thermalhydraulics Characteristics of 1200-MWel Pressure-Channel Supercritical Water-Cooled Reactor},
  journal = {Journal of Nuclear Engineering and Radiation Science},
  year = {2015},
  doi = {10.1115/1.4026387}
}
Kostenlos starten →