Investigations Into Superhydrophobicity of a Soot Surface Attributed to Nano-Asperities
Journal of Micro and Nano-Manufacturing · 2013
DOI: 10.1115/1.4023288 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Micro and Nano-Manufacturing, 2013. Verfasst von Rahul Ramachandran und 2 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 17 Literaturangaben.
Abstract (Originalsprache)
Superhydrophobicity in nature is the result of multiscale (hierarchical) roughness which consists of nano-asperities superimposed on micrometer scale roughness. A low-cost superhydrophobic surface was prepared by depositing soot on Vaseline coated glass substrates. The surface was rapidly prepared without any sophisticated fabrication facilities. The surface exhibited a remarkably high water contact angle of 161 deg and a roll-off angle of 3 deg. Atomic force microscopy (AFM) of the surface was done which revealed a very rough surface. The roughness features with nano-asperities superimposed on micrometer scale roughness enhance the water repellency. The micrometer scale peaks on the surface support the water droplet in a Cassie–Baxter state with the nano-asperities sheltering a composite interface below the droplet. The work of adhesion for the surface was also low at 18 nJ. The study will enable easy preparation of a cost effective superhydrophobic surface.
Zitieren
APA
Ramachandran, R., Seetharaman, M., & Sharma, N. N. (2013). Investigations Into Superhydrophobicity of a Soot Surface Attributed to Nano-Asperities. Journal of Micro and Nano-Manufacturing. https://doi.org/10.1115/1.4023288
Vancouver
Ramachandran R, Seetharaman M, Sharma NN. Investigations Into Superhydrophobicity of a Soot Surface Attributed to Nano-Asperities. Journal of Micro and Nano-Manufacturing. 2013. doi:10.1115/1.4023288
BibTeX
@article{Ramachandran2013,
author = {Ramachandran, Rahul and Seetharaman, Madhu and Sharma, N. N.},
title = {Investigations Into Superhydrophobicity of a Soot Surface Attributed to Nano-Asperities},
journal = {Journal of Micro and Nano-Manufacturing},
year = {2013},
doi = {10.1115/1.4023288}
}
EUVIMED