Nanomanufacturing Methods for the Reduction of Noise in Carbon Nanotube-Based Piezoresistive Sensor Systems
Journal of Micro and Nano-Manufacturing · 2013
DOI: 10.1115/1.4023159 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Micro and Nano-Manufacturing, 2013. Verfasst von Michael A. Cullinan und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 43 Literaturangaben.
Abstract (Originalsprache)
Carbon nanotube (CNT)-based piezoresistive strain sensors have the potential to outperform traditional silicon-based piezoresistors in MEMS devices due to their high strain sensitivity. However, the resolution of CNT-based piezoresistive sensors is currently limited by excessive 1/f or flicker noise. In this paper, we will demonstrate several nanomanufacturing methods that can be used to decrease noise in the CNT-based sensor system without reducing the sensor's strain sensitivity. First, the CNTs were placed in a parallel resistor network to increase the total number of charge carriers in the sensor system. By carefully selecting the types of CNTs used in the sensor system and by correctly designing the system, it is possible to reduce the noise in the sensor system without reducing sensitivity. The CNTs were also coated with aluminum oxide to help protect the CNTs from environmental effects. Finally, the CNTs were annealed to improve contact resistance and to remove adsorbates from the CNT sidewall. The optimal annealing conditions were determined using a design-of-experiments (DOE). Overall, using these noise mitigation techniques it is possible to reduce the total noise in the sensor system by almost 3 orders of magnitude and increase the dynamic range of the sensors by 48 dB.
Zitieren
APA
Cullinan, M. A., & Culpepper, M. L. (2013). Nanomanufacturing Methods for the Reduction of Noise in Carbon Nanotube-Based Piezoresistive Sensor Systems. Journal of Micro and Nano-Manufacturing. https://doi.org/10.1115/1.4023159
Vancouver
Cullinan MA, Culpepper ML. Nanomanufacturing Methods for the Reduction of Noise in Carbon Nanotube-Based Piezoresistive Sensor Systems. Journal of Micro and Nano-Manufacturing. 2013. doi:10.1115/1.4023159
BibTeX
@article{Cullinan2013,
author = {Cullinan, Michael A. and Culpepper, Martin L.},
title = {Nanomanufacturing Methods for the Reduction of Noise in Carbon Nanotube-Based Piezoresistive Sensor Systems},
journal = {Journal of Micro and Nano-Manufacturing},
year = {2013},
doi = {10.1115/1.4023159}
}
EUVIMED