EUVIMEDEUVIMED entdecken
Crossref

Conical Fluidized Bed with Arc Design for Improved Performance of Gas Distributor

Ihsan Hamawand, W. P. Da Silva, Ali H. Jawad

Studies in Engineering and Technology · 2015

DOI: 10.11114/set.v2i1.836 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Studies in Engineering and Technology, 2015. Verfasst von Ihsan Hamawand und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Particles distributions along a conical fluidized bed were predicted by an alternative arrangement of the minimum fluidization velocity equation. The proposed approach introduces two new equations which present the particle diameter in the bed as function of: height in the bed (Z), angle of inclination of the fluidized bed wall (θ), input flow rate (Qo), and gas distributor diameter (Do, 2ro). A novel arc-shaped design of the gas distributor was suggested, which provides enhanced distribution of the gas and enables greater control on the direction of the gas inlet. The model showed that the inclination of the fluidized bed wall should not exceed a critical angle, which can be determined with the set of equations specially developed for this purpose, to prevent inhomogeneous fluidization across the bed and accumulation of particles along the walls. By applying the Box Wilson Method, theoretical data were obtained for constant column diameter at the base (0.05 m), and varying bed height, Z, (range: 0.5 to 1.5 m), velocity of gas inlet, U, (range 0.25 to 1 m s-1), and balance factor, a, (range: 0.5 to 1, a new factor), respectively. The angle of inclination of the wall was first predicted based on the above parameters, and subsequently, the particle size distribution along the column was determined. Theoretically the novel arc-shaped distributor design has shown the potential of generating homogeneous fluidization regimes along the bed.

Zitieren

APA

Hamawand, I., Silva, W. P. D., & Jawad, A. H. (2015). Conical Fluidized Bed with Arc Design for Improved Performance of Gas Distributor. Studies in Engineering and Technology. https://doi.org/10.11114/set.v2i1.836

Vancouver

Hamawand I, Silva WPD, Jawad AH. Conical Fluidized Bed with Arc Design for Improved Performance of Gas Distributor. Studies in Engineering and Technology. 2015. doi:10.11114/set.v2i1.836

BibTeX
@article{Hamawand2015,
  author = {Hamawand, Ihsan and Silva, W. P. Da and Jawad, Ali H.},
  title = {Conical Fluidized Bed with Arc Design for Improved Performance of Gas Distributor},
  journal = {Studies in Engineering and Technology},
  year = {2015},
  doi = {10.11114/set.v2i1.836}
}
Kostenlos starten →