EUVIMEDEUVIMED entdecken
Crossref

LABORATORY EVALUATION OF BASALT FIBER-REINFORCED DENSE-GRADED ASPHALT

Maizatul Sofiah Mt Rodhi, Mohd Zul Hanif Mahmud, Norhidayah Abdul Hassan, Zulhakim Ab Aziz, Ramadhansyah Putra Jaya, Siti Nurzairah Batun, Al Dulaimi Hasanain Radhi Radeef

Malaysian Journal of Civil Engineering · 27.07.2026 · 38 (2) · 149-161

DOI: 10.11113/mjce.v38.26487 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Malaysian Journal of Civil Engineering, online erschienen am 27.07.2026. Verfasst von Maizatul Sofiah Mt Rodhi und 6 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The use of additives in asphalt has become an important approach to improve pavement performance and extend its lifespan. Among the additives, fiber reinforcements in asphalt are getting considerable attention as they have the potential to enhance stability and resistance to rutting and moisture damage. In this study, basalt fiber, a natural material known for its strength and durability, was used to modify dense-graded asphalt of AC14 prepared using 60/70 penetration grade bitumen, which is widely used for flexible pavement construction due to its balance of stiffness and workability under typical conditions. Basalt fiber was added at 0%, 0.25%, 0.5%, and 0.75% by total weight of aggregate, using the dry mixing method. The mixtures were tested for Marshall stability, moisture-induced damage, rutting performance using a wheel-tracking test, and abrasion resistance using the Cantabro loss test. The results generally demonstrated improved asphalt performance with the incorporation of basalt fiber, although the level of improvement varied with fiber content. Basalt fiber-modified mixtures exhibited improved moisture resistance compared with the conventional asphalt. The maximum stability was recorded at 17.0 kN for mixture containing 0.5% basalt fiber, which is higher than that of the conventional asphalt. Additionally, the rut depth decreased from 5.1 mm to 4.0 mm, while the abrasion loss reduced from 4.4% to 2.5%. Therefore, the findings justified that 0.5% basalt fiber is the optimum dosage among the fiber content investigated in improving the asphalt mixture performance.

Zitieren

APA

Rodhi, M. S. M., Mahmud, M. Z. H., Hassan, N. A., Aziz, Z. A., Jaya, R. P., Batun, S. N., & Radeef, A. D. H. R. (2026). LABORATORY EVALUATION OF BASALT FIBER-REINFORCED DENSE-GRADED ASPHALT. Malaysian Journal of Civil Engineering, 38(2), 149-161. https://doi.org/10.11113/mjce.v38.26487

Vancouver

Rodhi MSM, Mahmud MZH, Hassan NA, Aziz ZA, Jaya RP, Batun SN, et al. LABORATORY EVALUATION OF BASALT FIBER-REINFORCED DENSE-GRADED ASPHALT. Malaysian Journal of Civil Engineering. 2026;38(2):149-161. doi:10.11113/mjce.v38.26487

BibTeX
@article{Rodhi2026,
  author = {Rodhi, Maizatul Sofiah Mt and Mahmud, Mohd Zul Hanif and Hassan, Norhidayah Abdul and Aziz, Zulhakim Ab and Jaya, Ramadhansyah Putra and Batun, Siti Nurzairah and Radeef, Al Dulaimi Hasanain Radhi},
  title = {LABORATORY EVALUATION OF BASALT FIBER-REINFORCED DENSE-GRADED ASPHALT},
  journal = {Malaysian Journal of Civil Engineering},
  year = {2026},
  volume = {38},
  number = {2},
  pages = {149--161},
  doi = {10.11113/mjce.v38.26487}
}
Kostenlos starten →