EUVIMEDEUVIMED entdecken
Crossref

EFFECT OF STIRRING SPEED, TEMPERATURE, AND REINFORCEMENT FRACTION ON THE MICROSTRUCTURAL CHARACTERISTICS OF AL–SI/FE₂O₃ COMPOSITES

Dewi Izzatus Tsamroh, Cepi Yazirin, Agus Suprapto

Jurnal Mekanikal · 03.06.2026 · 179-189

DOI: 10.11113/jm.v49.719 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Mekanikal, online erschienen am 03.06.2026. Verfasst von Dewi Izzatus Tsamroh und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the influence of stirring speed, melting temperature, and reinforcement fraction on the microstructural characteristics of Al–Si/Fe₂O₃ composites produced using the stir casting method. A Taguchi-based experimental approach was employed to optimize the process variables through an orthogonal array design, enabling a systematic and efficient evaluation of parameter effects. The cast specimens were characterized using optical microscopy and SEM-EDX to examine morphology, particle distribution, and elemental composition. Grain size analysis was performed using Python-based image processing to obtain a more comprehensive quantification of the microstructure. The Taguchi analysis identified the optimal parameter combination at a stirring speed of 1000 rpm, a processing temperature of 600 °C, and a reinforcement fraction of 1 wt%. This setting produced a grain size of 235.92 μm, representing the most consistent performance based on the signal-to-noise ratio and demonstrating strong agreement between the predicted optimum and the observed microstructural results.

Zitieren

APA

Tsamroh, D. I., Yazirin, C., & Suprapto, A. (2026). EFFECT OF STIRRING SPEED, TEMPERATURE, AND REINFORCEMENT FRACTION ON THE MICROSTRUCTURAL CHARACTERISTICS OF AL–SI/FE₂O₃ COMPOSITES. Jurnal Mekanikal, 179-189. https://doi.org/10.11113/jm.v49.719

Vancouver

Tsamroh DI, Yazirin C, Suprapto A. EFFECT OF STIRRING SPEED, TEMPERATURE, AND REINFORCEMENT FRACTION ON THE MICROSTRUCTURAL CHARACTERISTICS OF AL–SI/FE₂O₃ COMPOSITES. Jurnal Mekanikal. 2026:179-189. doi:10.11113/jm.v49.719

BibTeX
@article{Tsamroh2026,
  author = {Tsamroh, Dewi Izzatus and Yazirin, Cepi and Suprapto, Agus},
  title = {EFFECT OF STIRRING SPEED, TEMPERATURE, AND REINFORCEMENT FRACTION ON THE MICROSTRUCTURAL CHARACTERISTICS OF AL–SI/FE₂O₃ COMPOSITES},
  journal = {Jurnal Mekanikal},
  year = {2026},
  pages = {179--189},
  doi = {10.11113/jm.v49.719}
}
Kostenlos starten →