EUVIMEDEUVIMED entdecken
Crossref

FIBRE SELECTION VIA ANALYTIC HIERARCHY PROCESS AND FIBRE ORIENTATION IN KENAF/THERMOPLASTIC COMPOSITES FOR FRUIT PICKER POLE

Amer Iskandar Ra'eis, Muhammad Asyraf Muhammad Rizal, Anahar Nurul Aina, Adam Haris Ashraf, Abu Bakar Mohd Supian, Mochamad Asrofi, Lin Feng Ng, Muhammad Azfar Noordin, Wan Aliff Abdul Saad, Zatil Hafila Kamaruddin

Jurnal Mekanikal · 03.06.2026 · 67-87

DOI: 10.11113/jm.v49.663 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Mekanikal, online erschienen am 03.06.2026. Verfasst von Amer Iskandar Ra'eis und 9 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research is a preliminary investigation into identifying appropriate natural fibres for blending with glass fibres to create durable and high-performing hybrid composites. The Analytical Hierarchy Process (AHP) was employed to select most suitable fibre in the enhancement of hybrid natural/synthetic the composites designed for fruit picker pole. Following this analysis, flexural test was conducted on kenaf yarn/fibreglass mesh-reinforced Acrylonitrile Butadiene Styrene (ABS) composites, unveiling the bending performance under the influence of stacking sequence. The kenaf yarn/fibreglass mesh composites with various stacking sequences were prepared via the hot press moulding compression technique. It was found that stacking sequences, 0°/90°/0°/90°, 0°/+45°/-45°/0°, 0°/+45°/90°/-45°, and 0°/0°/0°/0°, significantly affect the flexural properties of the composites, offering freedom of material design for certain engineering applications. Notably, the composites with 0°/0°/0°/0° stacking sequence displayed superior bending strength and elastic properties of 65.76 MPa and 1657.57 MPa, respectively. Conversely, the lowest flexural strength and modulus of 52.05 MPa and 908.69 MPa were noticed in composites with fibre stacking sequence of 0°/+45°/90°/-45°. These findings underscore the impact of the stacking sequence on the bending performance of the FRP composites. Optimising fibre stacking sequence emerges as a practical approach to enhance performance and sustainability in fruit picker pole.

Zitieren

APA

Ra'eis, A. I., Rizal, M. A. M., Aina, A. N., Ashraf, A. H., Supian, A. B. M., Asrofi, M., Ng, L. F., Noordin, M. A., Saad, W. A. A., & Kamaruddin, Z. H. (2026). FIBRE SELECTION VIA ANALYTIC HIERARCHY PROCESS AND FIBRE ORIENTATION IN KENAF/THERMOPLASTIC COMPOSITES FOR FRUIT PICKER POLE. Jurnal Mekanikal, 67-87. https://doi.org/10.11113/jm.v49.663

Vancouver

Ra'eis AI, Rizal MAM, Aina AN, Ashraf AH, Supian ABM, Asrofi M, et al. FIBRE SELECTION VIA ANALYTIC HIERARCHY PROCESS AND FIBRE ORIENTATION IN KENAF/THERMOPLASTIC COMPOSITES FOR FRUIT PICKER POLE. Jurnal Mekanikal. 2026:67-87. doi:10.11113/jm.v49.663

BibTeX
@article{Raeis2026,
  author = {Ra'eis, Amer Iskandar and Rizal, Muhammad Asyraf Muhammad and Aina, Anahar Nurul and Ashraf, Adam Haris and Supian, Abu Bakar Mohd and Asrofi, Mochamad and Ng, Lin Feng and Noordin, Muhammad Azfar and Saad, Wan Aliff Abdul and Kamaruddin, Zatil Hafila},
  title = {FIBRE SELECTION VIA ANALYTIC HIERARCHY PROCESS AND FIBRE ORIENTATION IN KENAF/THERMOPLASTIC COMPOSITES FOR FRUIT PICKER POLE},
  journal = {Jurnal Mekanikal},
  year = {2026},
  pages = {67--87},
  doi = {10.11113/jm.v49.663}
}
Kostenlos starten →