EUVIMEDEUVIMED entdecken
Crossref

Development of Wood Ash-Derived Geopolymer for Adsorptive Removal of Copper from Aqueous Solution

A. Nagesh, S. Mansur, M. N. Z. Abidin, M. S. C. Zain

Journal of Applied Membrane Science & Technology · 21.08.2026 · 30 (2) · 231-246

DOI: 10.11113/jamst.v30n2.354 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Membrane Science & Technology, online erschienen am 21.08.2026. Verfasst von A. Nagesh und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Heavy metal contamination by copper poses significant environmental risks, necessitating efficient and sustainable treatment technologies. This study investigated the potential of wood ash-derived geopolymer as a low-cost adsorbent for Cu²⁺ removal from aqueous solutions. Wood ash (WA) obtained from Acacia mangium was alkali-activated with metakaolin (MK) to synthesise a wood ash–metakaolin geopolymer (WAMK). The materials were characterised using particle size analysis (PSA), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM-EDX). Batch adsorption experiments were conducted under different pH conditions to evaluate Cu²⁺ removal performance. PSA showed that WAMK possessed the smallest particle size (D(0.9) = 42.87 μm) compared with WA (70.19 μm) and MK (48.10 μm), indicating improved particle refinement following geopolymerisation. WAMK successfully formed a stable aluminosilicate geopolymer structure, as confirmed by FTIR and SEM-EDX analyses. Under acidic conditions (pH 5), WA exhibited the highest Cu²⁺ removal efficiency (101.38%), whereas WAMK and MK achieved removal efficiencies of 40.09% and 18.71%, respectively. At pH 10, all adsorbents exhibited adsorption capacities ranging from 6.52 to 6.74 mg g⁻¹ and 100% removal efficiencies, indicated that copper removal was influenced by both adsorption and Cu(OH)₂ precipitation under alkaline conditions. These findings demonstrate that solution pH plays a critical role in copper removal performance and that geopolymerisation successfully produced a structurally stable adsorbent with potential for sustainable wastewater treatment applications.

Zitieren

APA

Nagesh, A., Mansur, S., Abidin, M. N. Z., & Zain, M. S. C. (2026). Development of Wood Ash-Derived Geopolymer for Adsorptive Removal of Copper from Aqueous Solution. Journal of Applied Membrane Science & Technology, 30(2), 231-246. https://doi.org/10.11113/jamst.v30n2.354

Vancouver

Nagesh A, Mansur S, Abidin MNZ, Zain MSC. Development of Wood Ash-Derived Geopolymer for Adsorptive Removal of Copper from Aqueous Solution. Journal of Applied Membrane Science & Technology. 2026;30(2):231-246. doi:10.11113/jamst.v30n2.354

BibTeX
@article{Nagesh2026,
  author = {Nagesh, A. and Mansur, S. and Abidin, M. N. Z. and Zain, M. S. C.},
  title = {Development of Wood Ash-Derived Geopolymer for Adsorptive Removal of Copper from Aqueous Solution},
  journal = {Journal of Applied Membrane Science & Technology},
  year = {2026},
  volume = {30},
  number = {2},
  pages = {231--246},
  doi = {10.11113/jamst.v30n2.354}
}
Kostenlos starten →