EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Determination of Residual Stress in Additively Manufactured 316L Stainless Steel Benchmark Parts Through Synchrotron X‐Ray Diffraction and Neutron Diffraction

Robin C. Laurence, David Canelo‐Yubero, Emad Maawad, Guilherme Abreu Faria, Peter Staron, Norbert Schell, Ranggi Sahmura Ramadhan, Sandra Cabeza, Arnold Paecklar, Thilo Pirling, Manuel Sánchez Poncela, Juan Manuel Martinez und 4 weitere

Strain · 2025-04 · 61 (2)

DOI: 10.1111/str.70005 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Strain, online erschienen am 13.03.2025. Verfasst von Robin C. Laurence und 15 weiteren Autor:innen. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Henry Royce Institute.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing (AM) of parts is typically associated with the generation of high residual stresses because of repeated exposure to high thermal gradients. Non‐destructive means of mapping the residual stresses are required for optimising these processes and/or mitigating such stresses by thermal treatments. However, the reliable determination of residual stress in AM parts remains challenging. Here, neutron diffraction, as well as energy‐ and angle‐dispersive synchrotron X‐ray diffraction have been used to map the residual stress within a laser powder bed fusion (LPBF) additively manufactured stainless steel 316L arch. The arch was designed by the EASI‐STRESS project as a residual stress benchmarking exercise in order to compare different residual stress analysis techniques. Residual stresses were determined along two scan lines deep within the bulk of the component. The results for the different neutron and synchrotron instruments are found to broadly agree with a standard deviation of 50 MPa or better, as well as with those predicted by an inherent strain finite element model. The results show near‐yield level residual stresses and suggest that both synchrotron X‐ray diffraction and neutron diffraction can be used to reliably determine the residual stress in LBPF parts.

Förderung

  • Henry Royce Institute

Zitieren

APA

Laurence, R. C., Canelo‐Yubero, D., Maawad, E., Faria, G. A., Staron, P., Schell, N., Ramadhan, R. S., Cabeza, S., Paecklar, A., Pirling, T., Poncela, M. S., Martinez, J. M., Slim, M. F., Buslaps, T., Withers, P. J., & Roy, M. (2025). Determination of Residual Stress in Additively Manufactured 316L Stainless Steel Benchmark Parts Through Synchrotron X‐Ray Diffraction and Neutron Diffraction. Strain, 61(2). https://doi.org/10.1111/str.70005

Vancouver

Laurence RC, Canelo‐Yubero D, Maawad E, Faria GA, Staron P, Schell N, et al. Determination of Residual Stress in Additively Manufactured 316L Stainless Steel Benchmark Parts Through Synchrotron X‐Ray Diffraction and Neutron Diffraction. Strain. 2025;61(2). doi:10.1111/str.70005

BibTeX
@article{Laurence2025,
  author = {Laurence, Robin C. and Canelo‐Yubero, David and Maawad, Emad and Faria, Guilherme Abreu and Staron, Peter and Schell, Norbert and Ramadhan, Ranggi Sahmura and Cabeza, Sandra and Paecklar, Arnold and Pirling, Thilo and Poncela, Manuel Sánchez and Martinez, Juan Manuel and Slim, M. F. and Buslaps, Thomas and Withers, Philip J. and Roy, Matthew},
  title = {Determination of Residual Stress in Additively Manufactured 316L Stainless Steel Benchmark Parts Through Synchrotron X‐Ray Diffraction and Neutron Diffraction},
  journal = {Strain},
  year = {2025},
  volume = {61},
  number = {2},
  doi = {10.1111/str.70005}
}
Kostenlos starten →