Short‐beam Shear Method for Assessment of Stress–Strain Curves for Fibre‐reinforced Polymer Matrix Composite Materials
Strain · 2013-10 · 49 (5) · 440-450
DOI: 10.1111/str.12050 ↗Kurz gefasst
Fachartikel in der Zeitschrift Strain, online erschienen am 24.08.2013. Verfasst von A. Makeev und 2 weiteren Autor:innen. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 30 Literaturangaben.
Abstract (Originalsprache)
This work presents a thorough description of a short‐beam shear (SBS) test method coupled with digital image correlation (DIC) for the measurement of shear stress–strain curves of polymer matrix composites. The method provides a time‐ and cost‐effective alternative to established methods, and the authors hope this work can serve as a starting point for discussions on the developments of new standards for the characterisation of shear stress–strain curves for composites. The experimental set‐up, including several modifications to the American Society of Testing and Materials current standard configuration, is described. Implementation of the DIC technique to obtain accurate surface strain in the SBS specimens is also presented. Accuracy of beam theory‐based shear stress calculation is assessed using a non‐linear finite element model (FEM). A simple means to improve the accuracy of the closed‐form shear stress approximation is provided. Glass/epoxy and carbon/epoxy composite material systems are used to demonstrate the developed method. Strain surveys are conducted to compare the experimentally generated and FEM‐computed strain fields and verify the accuracy of the shear stress–strain curves. Shear stress–strain response generated from SBS tests is also compared with V‐notched beam test results for further verification.
Zitieren
APA
Makeev, A., He, Y., & Schreier, H. (2013). Short‐beam Shear Method for Assessment of Stress–Strain Curves for Fibre‐reinforced Polymer Matrix Composite Materials. Strain, 49(5), 440-450. https://doi.org/10.1111/str.12050
Vancouver
Makeev A, He Y, Schreier H. Short‐beam Shear Method for Assessment of Stress–Strain Curves for Fibre‐reinforced Polymer Matrix Composite Materials. Strain. 2013;49(5):440-450. doi:10.1111/str.12050
BibTeX
@article{Makeev2013,
author = {Makeev, A. and He, Y. and Schreier, H.},
title = {Short‐beam Shear Method for Assessment of Stress–Strain Curves for Fibre‐reinforced Polymer Matrix Composite Materials},
journal = {Strain},
year = {2013},
volume = {49},
number = {5},
pages = {440--450},
doi = {10.1111/str.12050}
}
EUVIMED