EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY-NC 4.0

3D printing for bone regeneration: challenges and opportunities for achieving predictability

Saso Ivanovski iD, Omar Breik, Danilo Carluccio, Jamil Alayan, Ruben Staples, Cedryck Vaquette

Periodontology 2000 · 2023-10 · 93 (1) · 358-384

DOI: 10.1111/prd.12525 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Periodontology 2000, online erschienen am 12.10.2023. Verfasst von Saso Ivanovski und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Dentistry, Centre for Orofacial Regeneration, Reconstruction and Rehabilitation (COR3), The University of Queensland, Queensland, Herston, …. Hauptthemen laut MEDLINE: Tissue Engineering, Bioprinting. Die Arbeit wurde bisher 72-mal zitiert (Crossref) und nennt 210 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

3D printing offers attractive opportunities for large‐volume bone regeneration in the oro‐dental and craniofacial regions. This is enabled by the development of CAD‐CAM technologies that support the design and manufacturing of anatomically accurate meshes and scaffolds. This review describes the main 3D‐printing technologies utilized for the fabrication of these patient‐matched devices, and reports on their pre‐clinical and clinical performance including the occurrence of complications for vertical bone augmentation and craniofacial applications. Furthermore, the regulatory pathway for approval of these devices is discussed, highlighting the main hurdles and obstacles. Finally, the review elaborates on a variety of strategies for increasing bone regeneration capacity and explores the future of 4D bioprinting and biodegradable metal 3D printing.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Tissue EngineeringBioprintingHumansPrinting, Three-DimensionalComputer-Aided DesignBone RegenerationTissue Scaffolds

Stichwörter der Autor:innen

3D printingbone regenerationmaxillo-facial regenerationpolycaprolactoneregenerative dentistry

Autor:innen und Institutionen

  • School of Dentistry, Centre for Orofacial Regeneration, Reconstruction and Rehabilitation (COR3), The University of Queensland, Queensland, Herston, Australia.
  • Herston Biofabrication Institute, Metro North Hospital and Health Service, Brisbane, Queensland, Australia.

ORCID-Profile: Saso Ivanovski

Zitieren

APA

Ivanovski, S., Breik, O., Carluccio, D., Alayan, J., Staples, R., & Vaquette, C. (2023). 3D printing for bone regeneration: challenges and opportunities for achieving predictability. Periodontology 2000, 93(1), 358-384. https://doi.org/10.1111/prd.12525

Vancouver

Ivanovski S, Breik O, Carluccio D, Alayan J, Staples R, Vaquette C. 3D printing for bone regeneration: challenges and opportunities for achieving predictability. Periodontology 2000. 2023;93(1):358-384. doi:10.1111/prd.12525

BibTeX
@article{Ivanovski2023,
  author = {Ivanovski, Saso and Breik, Omar and Carluccio, Danilo and Alayan, Jamil and Staples, Ruben and Vaquette, Cedryck},
  title = {3D printing for bone regeneration: challenges and opportunities for achieving predictability},
  journal = {Periodontology 2000},
  year = {2023},
  volume = {93},
  number = {1},
  pages = {358--384},
  doi = {10.1111/prd.12525}
}
Kostenlos starten →