EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Clinical Application of 3D ‐Printed Custom Hemipelvic Prostheses With Negative Poisson's Ratio Porous Structures in Reconstruction After Resection of Pelvic Malignant Tumors

Xin Hu, Chuang Li, Xiaodi Tang, Yitian Wang, Yi Luo, Yong Zhou, Chongqi Tu iD, Xiao Yang, Li Min iD

Orthopaedic Surgery · 2025

DOI: 10.1111/os.70040 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Orthopaedic Surgery, 2025. Verfasst von Xin Hu und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopedic Surgery and Orthopedic Research Institute, West China Hospital, Sichuan University, Chengdu, China. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Pelvic Bones, Bone Neoplasms, Prosthesis Design. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Sichuan Science and Technology Agency, National Key Research and Development Program of China, National Science and Technology Major Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objectives

Pelvic bone tumor resection and reconstruction present significant challenges due to complex anatomy and weight‐bearing demands. 3D‐printed hemipelvic prostheses, incorporating customized osteotomy guides and porous structures, offer a promising solution for enhancing osseointegration. This study evaluates the long‐term outcomes of 3D‐printed custom hemipelvic reconstruction with a focus on the integration of auxetic biomaterials with a negative Poisson's ratio to optimize mechanical properties.

Methods

A retrospective analysis was conducted on 12 patients with primary pelvic malignancies who underwent reconstruction using 3D‐printed hemipelvic prostheses between January 2018 and May 2023. Follow‐up duration was 48 months (range, 29–64 months) Oncological, functional, surgical, pain control, and radiographic outcomes were assessed.

Results

At the latest follow‐up, 8 patients (66.7%) were disease‐free, 3 (25%) had disease progression, and 1 (8.3%) died from metastatic complications. Functional outcomes improved significantly, with the MSTS‐93 score increasing from 15 (range, 12–17) to 26 (range, 21–29). Pain scores decreased from 5 (range, 4–7) to 1 (range, 0–2). The median surgical duration was 270 min (range, 150–560 min), with intraoperative blood loss averaging 3200 mL (range, 1900–6300 mL). Complications included poor wound healing in 2 patients (16.7%), managed with VAC drainage. No mechanical failures, loosening, or fractures occurred. Accurate osteotomy, prosthesis implantation, and screw fixation were achieved. Successful osseointegration was observed in all cases, with no signs of bone absorption or osteolysis.

Conclusions

3D‐printed custom hemipelvic prostheses with auxetic biomaterials offer an effective solution for pelvic reconstruction, providing promising oncological, functional, and radiographic outcomes. These findings support the use of 3D printing in complex pelvic defect reconstruction, optimizing both osteointegration and mechanical strength.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalPelvic BonesBone NeoplasmsProsthesis DesignPlastic Surgery ProceduresPelvic NeoplasmsProstheses and ImplantsHumansRetrospective StudiesFemaleMaleMiddle AgedAdultAgedYoung AdultPorosity

Stichwörter der Autor:innen

3D‐printedhemipelvectomyosteosarcomaprostheses

Autor:innen und Institutionen

  • Department of Orthopedic Surgery and Orthopedic Research Institute, West China Hospital, Sichuan University, Chengdu, China.
  • Model Worker and Craftsman Talent Innovation Workshop of Sichuan Province, Sichuan University, Chengdu, China.
  • Operating Room, West China Hospital, Sichuan University/West China School of Nursing, Sichuan University, Chengdu, China.
  • National Engineering Research Center for Biomaterials, Sichuan University, Chengdu, China.
  • Provincial Engineering Research Center for Biomaterials Genome of Sichuan, Sichuan University, Chengdu, China.

ORCID-Profile: Chongqi Tu, Li Min

Förderung

  • Sichuan Science and Technology Agency
  • National Key Research and Development Program of China
  • National Science and Technology Major Project

Zitieren

APA

Hu, X., Li, C., Tang, X., Wang, Y., Luo, Y., Zhou, Y., Tu, C., Yang, X., & Min, L. (2025). Clinical Application of 3D ‐Printed Custom Hemipelvic Prostheses With Negative Poisson's Ratio Porous Structures in Reconstruction After Resection of Pelvic Malignant Tumors. Orthopaedic Surgery. https://doi.org/10.1111/os.70040

Vancouver

Hu X, Li C, Tang X, Wang Y, Luo Y, Zhou Y, et al. Clinical Application of 3D ‐Printed Custom Hemipelvic Prostheses With Negative Poisson's Ratio Porous Structures in Reconstruction After Resection of Pelvic Malignant Tumors. Orthopaedic Surgery. 2025. doi:10.1111/os.70040

BibTeX
@article{Hu2025,
  author = {Hu, Xin and Li, Chuang and Tang, Xiaodi and Wang, Yitian and Luo, Yi and Zhou, Yong and Tu, Chongqi and Yang, Xiao and Min, Li},
  title = {Clinical Application of 3D ‐Printed Custom Hemipelvic Prostheses With Negative Poisson's Ratio Porous Structures in Reconstruction After Resection of Pelvic Malignant Tumors},
  journal = {Orthopaedic Surgery},
  year = {2025},
  doi = {10.1111/os.70040}
}
Kostenlos starten →