EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Feasibility and Safety of the C1 “Zero Angle” Screw: A Novel “In–Out–In” Technique for Atlantoaxial Dislocation

Zexing Chen iD, Xinzhao Huang, Xiaobao Zou, Peirong Lian, Guoqiang Liu, Junlin Chen, Changrong Zhu iD, Xiangyang Ma iD

Orthopaedic Surgery · 2025

DOI: 10.1111/os.14309 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Orthopaedic Surgery, 2025. Verfasst von Zexing Chen und 7 weiteren Autor:innen. Beteiligte Einrichtung: The First School of Clinical Medicine, Southern Medical University, Guangzhou, China. Hauptthemen laut MEDLINE: Atlanto-Axial Joint, Joint Dislocations, Pedicle Screws, Spinal Fusion. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The National Natural Science Foundation of China, The Science and Technology Projects in Guangzhou, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objectives

To minimize the risk of V3 segment of vertebral artery (VA) injury in the atlantoaxial dislocation (AAD) patients with C1 pedicle height less than 4.0 mm and provide a strong toggle force in irreducible AAD and revision surgery. We evaluated the feasibility of C1 “Zero Angle” screw (C1ZAS) and safe entry point with “in–out–in” technique as an alternative option for C1 pedicle screw (PS) in cases with AAD.

Methods

Sixty‐one patients with AAD or atlantoaxial instability (AAI) (45 male and 16 female) who underwent cervical computed tomography and magnetic resonance imaging scans in our center between January 1, 2022 and December 31, 2023 were retrospectively reviewed. Measurements were made around the ideal trajectory and entry point of C1ZAS using computerized tomography (CT) and magnetic resonance imaging (MRI) in 61 patients. Radiographic measurements included (A) the distance from the recess to the transverse foramen (RTF); (B) the tricortical screw zone (TSZ); (C) the lateral mass height along the C1ZAS trajectory (LMH); (D) the screw length of C1ZAS (ZSL); (E) the screw length of C1 PS (PSL); (F) the distances from the recess to the dura (RD); (G) the distance from the recess to the spinal cord (RSC); (H) the distance from the inner of lateral mass to the spinal cord (ILMSC). During the period of January 1, 2022 to December 31, 2023, C1ZAS placement with “in–out–in” technique was used as an alternative option for C1 PS in 8 patients with AAD and unilateral/bilateral narrow C1 pedicles.

Results

The average RTF, TSZ, LMH, ZSL, RD, RSC, and ILMSC were 7.71, 6.14, 8.32, 33.23, 4.68, 10.02, and 2.91 mm respectively. The entry point of the C1ZAS was defined as the projection point of the inner of the recess to the posterior arch and the trajectory should be angled cephalad by 8.7° and medially by 0°. The 61 patients (122 sides) with AAD or AAI were classified into three groups: the low‐risk (76 sides, 62%), the intermedial‐risk (18 sides, 15%), and the high‐risk (28 sides, 23%) groups. Satisfactory C1ZAS placement and atlantoaxial reduction were achieved in all eight patients with AAD and unilateral/bilateral narrow C1 pedicles. No instance of C1ZAS placement‐related VA injury or dural laceration was observed.

Conclusions

When the placement of C1 PS is not feasible in patients with AAD and unilateral/bilateral narrow C1 pedicles, C1ZAS placement with “in–out–in” technique can be considered an effective alternative option, providing tricortical or quadricortical purchase for rigid fixation of the atlas.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Atlanto-Axial JointJoint DislocationsPedicle ScrewsSpinal FusionHumansMaleFemaleFeasibility StudiesRetrospective StudiesAdultMiddle AgedTomography, X-Ray ComputedYoung AdultAgedMagnetic Resonance ImagingAdolescent

Stichwörter der Autor:innen

atlantoaxial dislocationatlasin–out–innarrow pediclezero angle

Autor:innen und Institutionen

  • The First School of Clinical Medicine, Southern Medical University, Guangzhou, China.
  • Department of Orthopedics, General Hospital of Southern Theatre Command of PLA, Guangzhou, China.
  • Guangzhou University of Chinese Medicine, Guangzhou, China.
  • Department of Spinal Surgery, Orthopedic Medical Center, Zhujiang Hospital, Southern Medical University, Guangzhou, China.

ORCID-Profile: Zexing Chen, Changrong Zhu, Xiangyang Ma

Förderung

  • The National Natural Science Foundation of China
  • The Science and Technology Projects in Guangzhou
  • National Natural Science Foundation of China

Zitieren

APA

Chen, Z., Huang, X., Zou, X., Lian, P., Liu, G., Chen, J., Zhu, C., & Ma, X. (2025). Feasibility and Safety of the C1 “Zero Angle” Screw: A Novel “In–Out–In” Technique for Atlantoaxial Dislocation. Orthopaedic Surgery. https://doi.org/10.1111/os.14309

Vancouver

Chen Z, Huang X, Zou X, Lian P, Liu G, Chen J, et al. Feasibility and Safety of the C1 “Zero Angle” Screw: A Novel “In–Out–In” Technique for Atlantoaxial Dislocation. Orthopaedic Surgery. 2025. doi:10.1111/os.14309

BibTeX
@article{Chen2025,
  author = {Chen, Zexing and Huang, Xinzhao and Zou, Xiaobao and Lian, Peirong and Liu, Guoqiang and Chen, Junlin and Zhu, Changrong and Ma, Xiangyang},
  title = {Feasibility and Safety of the C1 “Zero Angle” Screw: A Novel “In–Out–In” Technique for Atlantoaxial Dislocation},
  journal = {Orthopaedic Surgery},
  year = {2025},
  doi = {10.1111/os.14309}
}
Kostenlos starten →