EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Construction of the Adjusted Scoliosis 3D Finite Element Model and Biomechanical Analysis under Gravity

Jiahao Li, Zhicheng An, Jigong Wu, Yongchang Gao iD, Sheng Lu, Da He, Yu Zhao iD

Orthopaedic Surgery · 2023-02 · 15 (2) · 606-616

DOI: 10.1111/os.13572 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Orthopaedic Surgery, online erschienen am 08.12.2022. Verfasst von Jiahao Li und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopaedic Surgery, Peking Union Medical College Hospital, Chinese Academy of Medical Sciences and Peking Union Medical College, Beiji…. Hauptthemen laut MEDLINE: Scoliosis, Intervertebral Disc, Kyphosis. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Beijing Municipal Science and Technology Commission.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objective

Adolescent idiopathic scoliosis (AIS) is a three‐dimensional structural deformity of the spine caused by the disruption of the biomechanical balance of the spine. However, the current biomechanical modeling and analysis methods of scoliosis cannot really describe the real state of the spine. This study aims to propose a high‐precision biomechanical modeling and analysis method that can reflect the spinal state under gravity and provide a theoretical basis for therapeutics.

Methods

Combining CT and X‐ray images of AIS patients, this study constructed an adjusted three‐dimensional model and FE model of the spine corresponding to the patient's gravity position, including vertebral bodies, intervertebral discs, ribs, costal cartilage, ligaments, and facet cartilage. Then, the displacement and stress of the spine under gravity were analyzed.

Results

A model of the T1‐Sacrum with 1.7 million meshes was constructed. After adding the gravity condition, the maximum displacement point was at T1 of thoracic vertebra (20.4 mm). The analysis indicates that the stress on the lower surface of the vertebral body in thoracolumbar scoliosis tended to be locally concentrated, especially on the concave side of the primary curvature's vertebral body (the maximum stress on the lower surface of T9 is 32.33 MPa) and the convex side of the compensatory curvature's vertebral body (the maximum stress on the lower surface of L5 is 41.97 MPa).

Conclusion

This study provides a high‐precision modeling and analysis method for scoliosis with full consideration of gravity. The reliability of the method was verified based on patient data. This model can be used to analyze the biomechanical characteristics of patients in the treatment plan design stage.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

ScoliosisIntervertebral DiscKyphosisAdolescentHumansFinite Element AnalysisReproducibility of ResultsThoracic VertebraeBiomechanical Phenomena

Stichwörter der Autor:innen

BiomechanicsFinite elementScoliosisStressX-ray

Autor:innen und Institutionen

  • Department of Orthopaedic Surgery, Peking Union Medical College Hospital, Chinese Academy of Medical Sciences and Peking Union Medical College, Beijing, China.
  • National Engineering Laboratory for Highway Maintenance Equipment, Chang'an University, Xi'an, China.
  • Chinese People's Liberation Army Strategic Support Force Characteristic Medical Center, Beijing, China.
  • Department of Orthopedic Surgery, the First People's Hospital of Yunnan Province, the Affiliated Hospital of Kunming University of Science and Technology, the Key Laboratory of Digital Orthopaedics of Yunnan Provincial,…
  • Department of Spine Surgery, Beijing Jishuitan Hospital, Beijing, China.

ORCID-Profile: Yongchang Gao, Yu Zhao

Förderung

  • Beijing Municipal Science and Technology Commission

Zitieren

APA

Li, J., An, Z., Wu, J., Gao, Y., Lu, S., He, D., & Zhao, Y. (2023). Construction of the Adjusted Scoliosis 3D Finite Element Model and Biomechanical Analysis under Gravity. Orthopaedic Surgery, 15(2), 606-616. https://doi.org/10.1111/os.13572

Vancouver

Li J, An Z, Wu J, Gao Y, Lu S, He D, et al. Construction of the Adjusted Scoliosis 3D Finite Element Model and Biomechanical Analysis under Gravity. Orthopaedic Surgery. 2023;15(2):606-616. doi:10.1111/os.13572

BibTeX
@article{Li2023,
  author = {Li, Jiahao and An, Zhicheng and Wu, Jigong and Gao, Yongchang and Lu, Sheng and He, Da and Zhao, Yu},
  title = {Construction of the Adjusted Scoliosis 3D Finite Element Model and Biomechanical Analysis under Gravity},
  journal = {Orthopaedic Surgery},
  year = {2023},
  volume = {15},
  number = {2},
  pages = {606--616},
  doi = {10.1111/os.13572}
}
Kostenlos starten →