EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Expanding sparse point deflection measurements to spatially continuous data via optical fiber sensors in long-span suspension bridges

Qianen Xu, Xinteng Ma, Yang Liu

Computer-Aided Civil and Infrastructure Engineering · 2025-07 · 40 (18) · 2695-2712

DOI: 10.1111/mice.13459 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Computer-Aided Civil and Infrastructure Engineering, 2025-07. Verfasst von Qianen Xu und 2 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In structural health monitoring, only the deflection of key sections of the bridge can be monitored; the spatial continuous deflection of the main girder cannot be identified. To solve this problem, a method for expanding sparse point deflection measurements to spatially continuous data via optical fiber sensors in long‐span suspension bridges is proposed. First, the distributed fiber‐optic sensors are arranged longitudinally along the bridge to obtain the strain data of high‐density measurement points on the main girder. Second, the influences of ambient temperature and cable system on the main girder strain of the suspension bridge are eliminated by using multiple types of sensors, and a transformation model from strain to deflection of the main girder based on an inverse finite element method is established. Then, by using thin‐walled bar torsion analysis and deflection data obtained from point sensors, a method for expanding the deflection data of high‐density measurement points on long‐span suspension bridges that combines data interpolation and particle swarm optimization is proposed. The proposed method can extend the deflection monitoring data at key sections to the spatial continuous position of the main girder, thus effectively identifying the deflection of high‐density measurement points on the main girder. Finally, a numerical simulation and monitoring data of a real bridge are used to evaluate the effectiveness of the proposed method, and the results show that the deflection identification results of the proposed method are more accurate than the conjugate beam method and the inverse finite element method without considering the main girder torsion.

Zitieren

APA

Xu, Q., Ma, X., & Liu, Y. (2025). Expanding sparse point deflection measurements to spatially continuous data via optical fiber sensors in long-span suspension bridges. Computer-Aided Civil and Infrastructure Engineering, 40(18), 2695-2712. https://doi.org/10.1111/mice.13459

Vancouver

Xu Q, Ma X, Liu Y. Expanding sparse point deflection measurements to spatially continuous data via optical fiber sensors in long-span suspension bridges. Computer-Aided Civil and Infrastructure Engineering. 2025;40(18):2695-2712. doi:10.1111/mice.13459

BibTeX
@article{Xu2025,
  author = {Xu, Qianen and Ma, Xinteng and Liu, Yang},
  title = {Expanding sparse point deflection measurements to spatially continuous data via optical fiber sensors in long-span suspension bridges},
  journal = {Computer-Aided Civil and Infrastructure Engineering},
  year = {2025},
  volume = {40},
  number = {18},
  pages = {2695--2712},
  doi = {10.1111/mice.13459}
}
Kostenlos starten →