EUVIMEDEUVIMED entdecken
Crossref

Retention of cobalt–chromium powder bed fusion (selective laser melting) removable partial dentures: An in vitro comparative analysis

Sara Zaky iD, Hala Mohamed iD, Mohamed Abdel-Latif

Journal of Prosthodontics · 06.07.2026

DOI: 10.1111/jopr.70185 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Prosthodontics, online erschienen am 06.07.2026. Verfasst von Sara Zaky und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, Faculty of Dentistry, Suez Canal University, Ismailia, Egypt. Die Arbeit nennt 32 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

Cobalt–chromium (Co–Cr) removable partial denture (RPD) frameworks are traditionally fabricated using conventional casting techniques. Recent advances in additive manufacturing employ laser‐sintering processes, such as selective laser melting (SLM), to produce RPD frameworks, potentially enhancing prosthesis quality. This study compared the retention of Co–Cr RPD frameworks fabricated via two methods: conventional casting from 3D‐printed resin patterns and direct SLM production. Materials and Methods Twelve Co–Cr RPD frameworks were fabricated and divided equally into two groups. Group 1 consisted of frameworks cast from 3D‐printed resin patterns; Group 2 comprised SLM‐fabricated frameworks. Retention forces were measured using a universal testing machine before and after simulated chewing cycles.

Results

SLM‐fabricated frameworks showed marginally higher retention forces than their 3D‐cast counterparts. However, following chewing simulation, the difference in retention between the two groups was not statistically significant.

Conclusion

Both SLM‐fabricated and conventionally 3D‐cast Co–Cr RPD frameworks exhibited satisfactory retentive performance. Consequently, SLM can be considered a viable alternative manufacturing modality for Co–Cr RPD frameworks, offering comparable functional retention to that of traditionally cast counterparts.

Schlagwörter

Stichwörter der Autor:innen

cobalt–chromiumremovable partial dentureretentionselective laser melting

Autor:innen und Institutionen

  • Department of Prosthodontics, Faculty of Dentistry, Suez Canal University, Ismailia, Egypt.
  • Department of Prosthodontics, RAKCOD-Ras Al Khaimah Medical and Health Science, Ras Al Khaimah, UAE.
  • Department of Removable Prosthodontics, Faculty of Dentistry, Sinai University, Ismailia, Egypt.

ORCID-Profile: Sara Zaky, Hala Mohamed

Zitieren

APA

Zaky, S., Mohamed, H., & Abdel-Latif, M. (2026). Retention of cobalt–chromium powder bed fusion (selective laser melting) removable partial dentures: An in vitro comparative analysis. Journal of Prosthodontics. https://doi.org/10.1111/jopr.70185

Vancouver

Zaky S, Mohamed H, Abdel-Latif M. Retention of cobalt–chromium powder bed fusion (selective laser melting) removable partial dentures: An in vitro comparative analysis. Journal of Prosthodontics. 2026. doi:10.1111/jopr.70185

BibTeX
@article{Zaky2026,
  author = {Zaky, Sara and Mohamed, Hala and Abdel-Latif, Mohamed},
  title = {Retention of cobalt–chromium powder bed fusion (selective laser melting) removable partial dentures: An in vitro comparative analysis},
  journal = {Journal of Prosthodontics},
  year = {2026},
  doi = {10.1111/jopr.70185}
}
Kostenlos starten →