EUVIMEDEUVIMED entdecken
Crossref

Surface microtexture and hydroxyapatite coating integrity of titanium dental implants following clinically relevant insertion torque

Mahmoud Elkahly, Mohamed Elshewy iD, Rafael Rocha Pacheco iD, Regina Messer, Geoffrey Thompson iD

Journal of Prosthodontics · 20.04.2026

DOI: 10.1111/jopr.70137 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Prosthodontics, online erschienen am 20.04.2026. Verfasst von Mahmoud Elkahly und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Restorative Sciences, Dental College of Georgia, Augusta University, Augusta, Georgia, USA. Die Arbeit nennt 12 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

To evaluate the effect of clinically relevant insertion torque on implant surface microtexture, hydroxyapatite coating integrity, and material transfer following single‐direction torsional insertion of titanium dental implants. Materials and Methods Nanohydroxyapatite–coated, cold‐worked commercially pure Grade 4 titanium implants were inserted into standardized polyurethane bone analogs at target torques of 30, 60, and 80 Ncm. As‐manufactured implants served as controls. Surface alterations were evaluated using scanning electron microscopy (SEM) across defined implant regions. Quantitative surface texture changes were assessed using gray‐level co‐occurrence matrix (GLCM) analysis. Energy‐dispersive spectroscopy (EDS) was used to assess changes in surface chemistry and detect material transfer to the surrounding substrate. Macroscopic coating loss was quantified using standardized photographic analysis.

Results

Implants inserted at 30 Ncm exhibited limited and localized surface wear, with most of the nanohydroxyapatite coating preserved. At 60 Ncm, coating loss became substantial, accompanied by surface smoothing and longitudinal striations oriented parallel to the direction of rotation. At 80 Ncm, extensive coating delamination, deep abrasion marks, and particulate debris were observed across multiple implant regions. GLCM analysis demonstrated a torque‐dependent reduction in surface roughness and complexity. EDS revealed progressive loss of nanohydroxyapatite‐associated elements on implant surfaces and increased detection of titanium and calcium within the surrounding substrate at higher torque levels.

Conclusions

Within the limitations of this in vitro study and the specific implant system evaluated, increasing insertion torque produced progressive, torque‐dependent degradation of implant surface microtexture and nanohydroxyapatite coating integrity, with corresponding evidence of material transfer to the surrounding substrate. Surface changes were limited at 30 Ncm but became substantial at 60 Ncm and extensive at 80 Ncm, despite no gross macroscopic deformation. These findings suggest that higher insertion torques may compromise engineered surface features intended to support early osseointegration and reinforce the clinical value of controlled insertion torque that prioritizes both mechanical stability and surface preservation.

Schlagwörter

Stichwörter der Autor:innen

energy‐dispersive spectroscopyimplant surface integrityprimary stabilityscanning electron microscopyspectroscopysurface engineeringtexture analysis

Autor:innen und Institutionen

  • Department of Restorative Sciences, Dental College of Georgia, Augusta University, Augusta, Georgia, USA.
  • Department of Oral Biology, Dental College of Georgia, Augusta University, Augusta, Georgia, USA.

ORCID-Profile: Mohamed Elshewy, Rafael Rocha Pacheco, Geoffrey Thompson

Zitieren

APA

Elkahly, M., Elshewy, M., Pacheco, R. R., Messer, R., & Thompson, G. (2026). Surface microtexture and hydroxyapatite coating integrity of titanium dental implants following clinically relevant insertion torque. Journal of Prosthodontics. https://doi.org/10.1111/jopr.70137

Vancouver

Elkahly M, Elshewy M, Pacheco RR, Messer R, Thompson G. Surface microtexture and hydroxyapatite coating integrity of titanium dental implants following clinically relevant insertion torque. Journal of Prosthodontics. 2026. doi:10.1111/jopr.70137

BibTeX
@article{Elkahly2026,
  author = {Elkahly, Mahmoud and Elshewy, Mohamed and Pacheco, Rafael Rocha and Messer, Regina and Thompson, Geoffrey},
  title = {Surface microtexture and hydroxyapatite coating integrity of titanium dental implants following clinically relevant insertion torque},
  journal = {Journal of Prosthodontics},
  year = {2026},
  doi = {10.1111/jopr.70137}
}
Kostenlos starten →