EUVIMEDEUVIMED entdecken
Crossref

Effects of two dentifrices on the surface properties and staining susceptibility of polymer‐based materials

Rua Babaier iD, Abdulaziz Alhotan iD, Julfikar Haider iD, Nick Silikas iD, David C Watts iD

Journal of Prosthodontics · 2025

DOI: 10.1111/jopr.13927 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Prosthodontics, 2025. Verfasst von Rua Babaier und 4 weiteren Autor:innen. Beteiligte Einrichtung: Prosthetic Dental Sciences, College of Dentistry, King Saud University, Riyadh, Saudi Arabia. Hauptthemen laut MEDLINE: Dentifrices, Composite Resins, Polymers, Dental Materials. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 53 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

This study examined the effect of whitening and abrasive regular dentifrices on the surface characteristics and stain susceptibility of polymer‐based CAD–CAM blocks subjected to artificial toothbrushing abrasion (TB). Materials and Methods Two resin composite blocks [CeraSmart (CS) and Grandio Blocs (GB)], one polymer‐infiltrated ceramic [Vita Enamic (VE)], and one direct resin composite [GrandioSO (RC)] were used to produce 60 specimens. The baseline mass, gloss, roughness, Vickers hardness (Hv), and color were measured after 7 days of water storage. The specimens were then separated into three TB treatment groups ( n = 5): water control (C), regular daily dentifrice (R), and whitening dentifrice (W). Measurements were repeated post‐TB (20,000 cycles). All specimens were immersed in coffee, and the CIE Δ E 00 was measured after 1, 7, and 14 days. Two‐way, one‐way ANOVA, and Tukey's post hoc tests were performed to determine any significant differences between the materials and TB groups. To determine the stain resistance, repeated measures of ANOVA, one‐way ANOVA, and Tukey's post hoc tests were used ( α = 0.05).

Results

The R and W mass changes were minimal (−3.77 to 3.16 g%). W reduced the gloss of all the materials by 12.6%–65%. All materials in W were slightly rougher (Ra, 0.107–0.144 μm) than those in R (Ra, 0.049–0.072 μm). The Δ E 00 ranged from 0.6 to 1.6 in W and 0.4 to 1.4 in R. VE was the hardest material at baseline (Hv = 362), whereas brushing and staining lowered Hv in all TB groups (282.8–300.6). After brushing in W, VE, and RC were more susceptible to coffee stains than were CS and GB.

Conclusions

The whitening dentifrice roughened CAD–CAM specimens, reducing gloss, yet lightened some materials. Polymer‐infiltrated ceramic and direct resin composite specimens brushed with abrasive regular or whitening dentifrice resulted in more intense staining than the CAD–CAM resin composites.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

DentifricesComposite ResinsPolymersDental MaterialsSurface PropertiesToothbrushingMaterials TestingCeramicsHumansHardnessColorCoffee

Stichwörter der Autor:innen

CAD–CAMbrushingcolorglosshardnessstainabilitysurface roughness

Substanzen

DentifricesComposite ResinsPolymersVITA EnamicDental MaterialsCoffee

Autor:innen und Institutionen

  • Prosthetic Dental Sciences, College of Dentistry, King Saud University, Riyadh, Saudi Arabia.
  • Dental Health Department, College of Applied Medical Sciences, King Saud University, Riyadh, Saudi Arabia.
  • Biomaterials Science, Division of Dentistry, School of Medical Sciences, University of Manchester, Manchester, UK.
  • Department of Engineering, Manchester Metropolitan University, Manchester, UK.
  • Photon Science Institute, University of Manchester, Manchester, UK.

ORCID-Profile: Rua Babaier, Abdulaziz Alhotan, Julfikar Haider, Nick Silikas, David C Watts

Zitieren

APA

Babaier, R., Alhotan, A., Haider, J., Silikas, N., & Watts, D. C. (2025). Effects of two dentifrices on the surface properties and staining susceptibility of polymer‐based materials. Journal of Prosthodontics. https://doi.org/10.1111/jopr.13927

Vancouver

Babaier R, Alhotan A, Haider J, Silikas N, Watts DC. Effects of two dentifrices on the surface properties and staining susceptibility of polymer‐based materials. Journal of Prosthodontics. 2025. doi:10.1111/jopr.13927

BibTeX
@article{Babaier2025,
  author = {Babaier, Rua and Alhotan, Abdulaziz and Haider, Julfikar and Silikas, Nick and Watts, David C},
  title = {Effects of two dentifrices on the surface properties and staining susceptibility of polymer‐based materials},
  journal = {Journal of Prosthodontics},
  year = {2025},
  doi = {10.1111/jopr.13927}
}
Kostenlos starten →