Preparation and Characterization of Injectable Augmentation Gels Containing Polycaprolactone and Hyaluronic Acid
Journal of Cosmetic Dermatology · 2025
DOI: 10.1111/jocd.16730 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Cosmetic Dermatology, 2025. Verfasst von Meryem Erken Turkmen und 4 weiteren Autor:innen. Beteiligte Einrichtung: Bioengineering Division, Institute of Science, Hacettepe University, Ankara, Turkey. Hauptthemen laut MEDLINE: Hyaluronic Acid, Polyesters, Dermal Fillers, Cosmetic Techniques. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hacettepe University Scientific Research Projects Coordination Unit.
Abstract (Originalsprache)
Background
Injectable augmentation gels are widely used in the treatment of soft tissue. The composition of these gels has to be continuously improved due to the limitations of the currently available formulations.
Aims
This study focuses on the development of an innovative injectable gel designed to address current trends and specific needs within the field.
Methods
The current study utilized a safer hyaluronic acid (HA) gel carrier, created with a less toxic cross‐linker, in combination with polycaprolactone (PCL) microspheres at various concentrations. PCL microspheres were prepared using an emulsification‐solvent evaporation technique. Six different gel formulations were developed using PCL microspheres and biphasic HA gel structures.
Results
The produced microspheres had non‐agglomerated, smooth surfaces with an average particle size of approximately 45 ± 0.14 μm. The rheological results of the PCL‐HA6 such as storage modulus ( G ', Pa), loss modulus ( G ", Pa), complex viscosity ( η *), and phase angle (°) at 1 Hz frequency were measured as 553.97 ± 32.48, 368.4 ± 12.24, 105.9 ± 5.27, and 33.65 ± 0.92, respectively, and the injection force was measured as 9.64 ± 1.46. In vitro tests revealed that the PCL‐HA6 group showed the highest cell viability compared to the other groups and provided a relative increase in collagen production over time, as demonstrated by the relevant gene expression.
Conclusions
The developed PCL/HA gel exhibited biocompatibility and non‐toxicity, making it a safe option for soft tissue augmentation. It demonstrated potential for medical applications and exhibited favorable rheological characteristics and injectability.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Bioengineering Division, Institute of Science, Hacettepe University, Ankara, Turkey.
- Molecular Biology Section, Department of Biology, Faculty of Science, Hacettepe University, Ankara, Turkey.
- Centre for Bioengineering, Hacettepe University, Ankara, Turkey.
ORCID-Profile: Halil Murat Aydin
Förderung
- Hacettepe University Scientific Research Projects Coordination Unit
Zitieren
APA
Turkmen, M. E., Ghaffarlou, M., Kilic, B., Karaaslan, C., & Aydin, H. M. (2025). Preparation and Characterization of Injectable Augmentation Gels Containing Polycaprolactone and Hyaluronic Acid. Journal of Cosmetic Dermatology. https://doi.org/10.1111/jocd.16730
Vancouver
Turkmen ME, Ghaffarlou M, Kilic B, Karaaslan C, Aydin HM. Preparation and Characterization of Injectable Augmentation Gels Containing Polycaprolactone and Hyaluronic Acid. Journal of Cosmetic Dermatology. 2025. doi:10.1111/jocd.16730
BibTeX
@article{Turkmen2025,
author = {Turkmen, Meryem Erken and Ghaffarlou, Mohammadreza and Kilic, Busra and Karaaslan, Cagatay and Aydin, Halil Murat},
title = {Preparation and Characterization of Injectable Augmentation Gels Containing Polycaprolactone and Hyaluronic Acid},
journal = {Journal of Cosmetic Dermatology},
year = {2025},
doi = {10.1111/jocd.16730}
}
EUVIMED