EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analysis of microscopy techniques to measure segregation in continuous‐cast steel slabs

Araf Al Rafi, Begoña Santillana, Renfei Feng, Brian G Thomas iD, André B Phillion

Journal of Microscopy · 2024-09 · 295 (3) · 266-277

DOI: 10.1111/jmi.13310 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Microscopy, online erschienen am 27.04.2024. Verfasst von Araf Al Rafi und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, McMaster University, Hamilton, Ontario, Canada. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada, McMaster Steel Research Centre.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The accurate characterisation of centreline segregation requires precise measurements of composition variations over large length scales (10 ) across the centreline of the cast product, while having high resolution, sufficient to quantify the significant composition variations between dendrites due to microsegregation at very small length scales (10). This study investigates the potential of a novel microscopy technique, named Synchrotron Micro X‐ray Flurorescence (SMXRF), to generate large‐scale high‐resolution segregation maps from a steel sample taken from a thin slab caster. Two methods, Point Analysis and Regression Analysis, are proposed for SMXRF data calibration. By comparing with the traditional Laser‐Induced Breakdown Spectroscopy (LIBS), and Electron Probe Micro Analyser (EPMA) techniques, we show that SMXRF is successful in quantitative characterisation of centreline segregation. Over large areas (e.g. 12 16 ) and at high resolution (10–50 pixel size) various techniques yield comparable outcomes in terms of composition maps and solute profiles. The findings also highlight the importance of both high spatial resolution and large field of view to have a quantitative, accurate, and efficient measurement tool to investigate segregation phenomena.

Schlagwörter

Stichwörter der Autor:innen

EPMALIBSSMXRFcentreline segregationcontinuous casting

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, McMaster University, Hamilton, Ontario, Canada.
  • Tata Steel, R&D, IJmuiden, the Netherlands.
  • Canadian Light Source, University of Saskatchewan, Saskatoon, Canada.
  • Department of Mechanical Engineering, Colorado School of Mines, Golden, Colorado, USA.

ORCID-Profile: Brian G Thomas

Förderung

  • Natural Sciences and Engineering Research Council of Canada
  • McMaster Steel Research Centre

Zitieren

APA

Al Rafi, A., Santillana, B., Feng, R., Thomas, B. G., & Phillion, A. B. (2024). Analysis of microscopy techniques to measure segregation in continuous‐cast steel slabs. Journal of Microscopy, 295(3), 266-277. https://doi.org/10.1111/jmi.13310

Vancouver

Al Rafi A, Santillana B, Feng R, Thomas BG, Phillion AB. Analysis of microscopy techniques to measure segregation in continuous‐cast steel slabs. Journal of Microscopy. 2024;295(3):266-277. doi:10.1111/jmi.13310

BibTeX
@article{AlRafi2024,
  author = {Al Rafi, Araf and Santillana, Begoña and Feng, Renfei and Thomas, Brian G and Phillion, André B},
  title = {Analysis of microscopy techniques to measure segregation in continuous‐cast steel slabs},
  journal = {Journal of Microscopy},
  year = {2024},
  volume = {295},
  number = {3},
  pages = {266--277},
  doi = {10.1111/jmi.13310}
}
Kostenlos starten →